User Pass
Home Sign Up Contact Log In
Forum > Discuss GLB Issues With Catch22 > NOT A BUG - CLOSED > not sure if this is a bug or not...
BruinsBold
offline
Link
 
ok, this is how i had my DC set for my WR...

WR

WR A
WR B
WR C
WR D
WR E

WR1

Empty

WR2

Emptu

WR3

WR A

WR4

WR B

WR5

Empty



ok I was expecting the following:

2 WR sets would put WR A at the #1 spot and WR B at the #2 spot/

3 WR sets would have put WR B at the #1, WR C at the #2, and WR A at the #3.

4 WR sets would have put WR C at the #1, WR D at the #2, WR A at the #3, WR B at the #4.

5 WR sets would have put WR C at the #1, WR D at the #2, WR A at the #3, WR B at the #4, and WR E at the #5.


I got the following:

no matter what the set i got results based solely off the primary DC and no adjustments from the numbered slots.

for example in a 4 WR set we got WR A at the #1, WR B at the #2, WR C at #3, and WR D at #4.

I have completely cleared my wr1 - 5 slots and done it the old school way, but i was really hoping the the WR slots were going to allow us to take our #1 recever and move him to the slots in 3 WR sets. I seem to remember a post byu an admin about that.


so is this a bug or did it work exactly like it was supposed to?
 
Sigmaforce
offline
Link
 
I believe it did. You have WR A starting at WR3, but when you run it the way you have it, it puts the top available player from the generic WR chart (WR A in most cases) until the WR1 spot. Now WR3 cannot start WR A, so it goes down the list until it finds one that isn't already in the formation which is most likely WR C, as WR B was put into the WR 2 spot.
 
BruinsBold
offline
Link
 
then we need a way to specify which chart to check first... i wanted it to check the slots before the generic chart.

Bruins
 
sjmay
offline
Link
 
Originally posted by BruinsBold
then we need a way to specify which chart to check first... i wanted it to check the slots before the generic chart.

Bruins


It did, it checked WR 1, found nothing there, put something there, It then moved to WR 2, found nothing there, put something there.
 
Sigmaforce
offline
Link
 
If you move your best WR down to the third spot of the basic WR depth chart, your guy should play in the slot a lot more, but also (depending on your stamina/advanced energy settings) should play a decent amount in the WR 1 or 2 spots.

I can't think of a more reliable way of doing what you want, in any event.
 
ripgressor
offline
Link
 
The WR1-WR5 slots overrule the WR slot or in others words, if you have anything in the WR1-WR5 slots the WR slot is ignored.
 
RAPB
offline
Link
 
Maybe it checked #1 WR first, then #2 WR (and so on)

#1 WR - take WR depth, for #1WR is empty - take WR A
#2 WR - take WR depth, for #2WR is empty - take WR B
#3 WR - take #3WR depth - (oops) guy already assigned - so put in from WR depth - take WR C
#4 WR - take #4WR depth - (oops) guy already assigned - so put in from WR depth - take WR D
#2 WR - take WR depth, for #5WR is empty - take WR E


?

(wild guess)
 
RMiller517
offline
Link
 
Thread locked by moderator.
 


You are not logged in. Please log in if you want to post a reply.