Warrior General Games

14:47 2nd & 10 OWN 45 V QB1 screen pass to V HB3 to the left side, caught (3.5 yd gain) [tackle: Kristofer Rossi]
For that quarter, 2nd & 10, between own 35 and opp 35, i don't have a screen pass play in my package for this input !?!
Many other strange selected plays occured, i thought maybe my OAI wasn't set as active but it is...from My AI, do i need to import all to the Team AI ? Cuz DAI worked great and it is selected as active from My AI...
I'm a little confused here

Be sure to test any plays you deem 'incorrect'. More often than not it's simply some little missed thing or an improper number somewhere (down, distance, time left, anything) but you can't be sure until you test the 'problem play' and show a matching result. If no matching result then there's a problem inside the AI... likely in the INPUT.

Test done, no error...

I found why...I feel soooo stupid....to forget allowing acces to my tactics

Every single time, over the 15+ years of GLB, that someone posts something like this, it's always an Ai conflict

The play tester might not show you an error, because the situation is covered.

It's most likely that you have an input glitch in a line somewhere above whatever line is giving you the problem.

In your case, I would double check every input that does have a screen pass in it, to see if there's an overlap in whatever limits you have for this situation.

There's also the possibility that you clicked the wrong play in the package itself, if you're using packages. Sometimes it can be that simple.

Welcome to the wonderful world of debugging code.

Originally posted by KingKnut
I found why...I feel soooo stupid....to forget allowing acces to my tactics

or that too. it really helps to be using the Ai you think you're using.

Originally posted by KingKnut
I found why...I feel soooo stupid....to forget allowing acces to my tactics

Glad you found it. Sorry for how yer feelin, brother. Lord knows you're not alone in makin those kinds of mistakes. I could write a book.

Dumb question but why did allowing access to your AI make it not call the correct plays in your packages?

Originally posted by Opaul639
Dumb question but why did allowing access to your AI make it not call the correct plays in your packages?

I didn't copy to my team, even if i'm the owner of the team i had to allow my team acces to my tactics

Originally posted by Opaul639
Dumb question but why did allowing access to your AI make it not call the correct plays in your packages?

To take it further. There are 2 ways to use your AI's and packages (that go with it). #1.) You can create them on the team page or... #2.) You can allow access to team. Without access you cannot copy to team.

Originally posted by KingKnut
I didn't copy to my team, even if i'm the owner of the team i had to allow my team acces to my tactics

Ah, ok, I thought you meant allowing access to other GM's, etc..... I made that same mistake as well and then I forgot to set my AI as active.
I was making "adjustments" based off the basic AI and not my actual playcalling AI.