Warrior General Games

Is there anywhere that list how dots are tagged in the default Casual League AI?

Example: For offense, is the Power HB tagged as RB2? What about the scat RB?

Just curious.

Thanks

https://glb.warriorgeneral.com/game/faq.pl?cat=Team%20Ownership#272

The preset gameplans utilize the following depth chart setup:

QB = Passing QB
QB1 = Rushing QB - only used for Wildcat preset
QB2 = All QB's - this slot is seldom used for anything but handoffs/pitches
RB = Primary Rusher
RB1 = Power Back/Inside Runs
RB2 = Receiving/Scat Back
FB = Primary Rusher
FB1 = Blocker
FB2 = Receiving/Scat Back
TE/TE2 = Receiver
BTE/TE1 = Blocker

Originally posted by MrMoose
https://glb.warriorgeneral.com/game/faq.pl?cat=Team%20Ownership#272

The preset gameplans utilize the following depth chart setup:

QB = Passing QB
QB1 = Rushing QB - only used for Wildcat preset
QB2 = All QB's - this slot is seldom used for anything but handoffs/pitches
RB = Primary Rusher
RB1 = Power Back/Inside Runs
RB2 = Receiving/Scat Back
FB = Primary Rusher
FB1 = Blocker
FB2 = Receiving/Scat Back
TE/TE2 = Receiver
BTE/TE1 = Blocker

Man thank you so much. I looked for a while before I posted. Just missed it.

Originally posted by MrMoose
https://glb.warriorgeneral.com/game/faq.pl?cat=Team%20Ownership#272

The preset gameplans utilize the following depth chart setup:

QB = Passing QB
QB1 = Rushing QB - only used for Wildcat preset
QB2 = All QB's - this slot is seldom used for anything but handoffs/pitches
RB = Primary Rusher
RB1 = Power Back/Inside Runs
RB2 = Receiving/Scat Back
FB = Primary Rusher
FB1 = Blocker
FB2 = Receiving/Scat Back
TE/TE2 = Receiver
BTE/TE1 = Blocker

Originally posted by dergillz
Is there anywhere that list how dots are tagged in the default Casual League AI?

Example: For offense, is the Power HB tagged as RB2? What about the scat RB?

Just curious.

Thanks

dergillz

note that these depth chart spots posted by MrMoose will only work if you are using the GLB presets (power, run, first, big, west coast, etc). For the default casual AI, it will not use these special depth chart spots and will only pull from the primary depth chart.

Originally posted by sunder B
dergillz

note that these depth chart spots posted by MrMoose will only work if you are using the GLB presets (power, run, first, big, west coast, etc). For the default casual AI, it will not use these special depth chart spots and will only pull from the primary depth chart.


Gotcha! Thanks again.