Originally posted by Zoblefu
Well you don't have to completely overlap by a whole yard, but to account for the half yards you do have to have a slight overlap. Imagine these two scenarios for examples, in order like it would be in your DAI:
Example 1
2nd down, 0-3 yards (Short)
2nd down, 3-7 yards (Medium)
2nd down, 7-99 yards (Long)
Here, 3 yards is short (its on top), 3.5 yards is medium. 7 yards is medium, 7.5 yards is long. "inches" is short (need to start from 0), .5 is short, etc.
This is the same as:
Short less than or equal to 3
Medium greater than 3, less than or equal to 7
Long greater than 7
Example 2
2nd down, 7-99 yards (Long)
2nd down, 3-7 yards(Medium)
2nd down, 0-3 yards (Short)
Here, 3 yards is Medium. 2.5 yards is short. 7 yards is long. 6.5 is medium.
This is the same as:
Short less than 3
Medium greater than or equal to 3, less than 7.
Long greater than or equal to 7.http://www.glbexactscout.com (BETA) for your detailed scouting needs 
Great job Zob! This is exactly right.