User Pass
Home Sign Up Contact Log In
Forum > FAQ's, Player Guides and Newbie Help > Using multiple Cover Man on DPC
Page:
 
Sweet T
offline
Link
 
so you know when you can put an LOLB or SS to cover a TE or an HB, and also at the end you can either have them play zone or blitz.

how would the defensive player follow the play? would he follow the first appointed cover?

how does he know whether to zone or blitz?
 
InRomoWeTrust
Lead Mod
offline
Link
 
It's a sort of progressions for the defender.

He'll start with the first choice and run through each choice w/ vision checks if they're running a route or blocking. Obviously if someone is running a route they'll go cover them, if someone is blocking they proceed to the next progression.

The last option is zone/blitz. They'll either play in a zone relative to their position or blitz as their last choice (assuming all their designated coverages are staying in to block).
Edited by Mat McBriar on May 30, 2009 23:51:19
 
Sweet T
offline
Link
 
Originally posted by Mat McBriar
It's a sort of progressions for the defender.

He'll start with the first choice and run through each choice w/ vision checks if they're running a route or blocking. Obviously if someone is running a route they'll go cover them, if someone is blocking they proceed to the next progression.

The last option is zone/blitz. They'll either play in a zone relative to their position or blitz as their last choice (assuming all their designated coverages are staying in to block).


OK. gotcha.

How much does the player's vision attribute play a role into this? at what amount of vision.

i.e. say I want to do a chance of blitz option from the weakside without assigning an automatic blitz.
CB3 set to cover [WR3] or [Blitz]
with FS covering WR3 if the CB3 decides to blitz. How often would the CB blitz be based on his vision?
 
InRomoWeTrust
Lead Mod
offline
Link
 
He'd only blitz if WR3 was blocking (aka a run play). Even then the WR3 would most often pick him up w/ a block.

It's not like a chance type deal where he may or may not blitz. I want to say with average vision it'd probably vary between one and a few ticks before he actually blitzed, but the WR will be in your way most of the time to block you.
 
Sweet T
offline
Link
 
Originally posted by Mat McBriar
He'd only blitz if WR3 was blocking (aka a run play). Even then the WR3 would most often pick him up w/ a block.

It's not like a chance type deal where he may or may not blitz. I want to say with average vision it'd probably vary between one and a few ticks before he actually blitzed, but the WR will be in your way most of the time to block you.


Oh OK. I'd thought it would work like the default DAI without having a percentage amount.

Crap, now I'll have to re-check all my plays over.
 
Sweet T
offline
Link
 
OK, one more question.

What about when it’s used for multiple formation?

I using a Quarter formation to operate a M2M/Zone on a custom Late Lead Prevent play.
I have CB1, CB2, CB3 covering their guys,
while the CB4 is covering [WR4] or [TE] or [HB] or [FB]
And the CB5 is covering [WR5] or [HB] or [TE] or [FB]

In the input of “Late Lead Prevent” I would list the opponents’ offensive play as “Any formation”

Would the CB’s to automatically to the first assigned duty that matches the offense formation?
i.e.
In a Singleback or I-variation defense, will CB4 skip WR4 go straight to covering the TE with using vision check since WR4 aren’t in Singleback formations.
 
AngryDragon
offline
Link
 
This was addressed by bort in one of the bugs subsections but I can't find the post. Here is how it works if I recall correct.

Say you have a FB or HB or TE or Blitz setting. If a FB is on the field it will stop there. If the FB runs a route then the player will cover him. If the FB stays to block then he should blitz after the vision check.

Now say the same settings. FB or HB or TE or blitz. Now lets say it is a singleback formation and no FB is on the field. Then the player will cover the HB. Again if the HB runs a route the player will cover if not a vision check happens and then he blitzes because of the blitz setting. So the TE never gets covered.

I think the confusion happens when a setting like above is created but zone is the last setting. Lets say the HB blocks and the TE runs through the players zone. It is assumed the progression worked but it did not it was just crazy luck.

I wish I could find the post but it is buried as usual. lol
 
AngryDragon
offline
Link
 
To clear it up further.

Basically there is little point to set any coverage for more than 2 players. It looks for who is on the field not who runs a route. If the HB is the first selection he will always be on the field so the next setting will be zone or blitz if the HB does not run a route.
 
InRomoWeTrust
Lead Mod
offline
Link
 
You positive on that AngryDragon? I thought (and in my mind confirmed) the Zone/Blitz was your last option, not that it'd essentially override other progressions I had lined up. Hell if that is indeed true all my DPC plays were setup entirely wrong and I never picked up anything funny.

Find that quote por favor
Edited by Mat McBriar on May 31, 2009 00:41:25
 
AngryDragon
offline
Link
 
Originally posted by Mat McBriar
You positive on that AngryDragon? I thought (and in my mind confirmed) the Zone/Blitz was your last option, not that it'd essentially override other progressions I had lined up.

Find that quote por favor


Yes I will hunt for it. Give me 20 minutes cause its buried. I had to change all my plays after I read it.
 
Sweet T
offline
Link
 
Originally posted by AngryDragon
To clear it up further.

Basically there is little point to set any coverage for more than 2 players. It looks for who is on the field not who runs a route. If the HB is the first selection he will always be on the field so the next setting will be zone or blitz if the HB does not run a route.


Oh really? damn.

I was hoping to use some kind of set like this:

LOLB cover [TE] or [HB] or [FB] or [Blitz]
with SS covering [HB] or [TE] or [FB] or [Zone]

this is use for any of the I's and Singleback if I were to set it up for multi formations.
Edited by Sweet Jesus on May 31, 2009 00:46:46
Edited by Sweet Jesus on May 31, 2009 00:43:08
 
AngryDragon
offline
Link
 
From the DPC

Defensive Play Builder
You may drag players around to position them as you like. Players set to "man" coverage will automatically line up across from their man when plays are simmed, and will cover the first man in their progression who is on the field, regardless of what that man is set to do. If the selected man does not run a route, the player will play a short zone or blitz instead based on your settings. Players who are set to "man w/o move" will play man coverage in the same way, but will start from where they are positioned.

NOTE: This feature is currently under scrutiny and may have certain features disabled at a later time if there are found to be exploits.

http://goallineblitz.com/game/forum_thread.pl?thread_id=2520512&page=4
scroll down.
 
InRomoWeTrust
Lead Mod
offline
Link
 
I'm going through my DPC plays now (trying to find an opportune play to search for a confirmation of the progressions to confirm/deny). While it's in my brain, if this is indeed true, I'd bet 60% if not more have their DPC misinterpreting their intentions, lol.
 
Chysil
Mod
offline
Link
 
do these drop down menus work now? I seem to remember them not working for the longest time


I know i made separate plays for each formation (sometimes "duplicate plays" just to make sure I had everyone assigned to someone who was on the field. While it was a pain in the ass, it actually made my defense pretty organized
Edited by Chysil on May 31, 2009 00:48:47
 
AngryDragon
offline
Link
 
Originally posted by Chysil
do these drop down menus work now? I seem to remember them not working for the longest time


I know i made separate plays for each formation (sometimes "duplicate plays" just to make sure I had everyone assigned to someone who was on the field. While it was a pain in the ass, it actually made my defense pretty organized


I think the problem was the last option was not working early in the season and say a LB was set to cover a TE or blitz and the TE blocked. The LB would freeze. This was hard to spot because some would have them cover the TE or zone and just assumed the freeze was a zone but it was not.

All this was worked out early in the season if I recall correct.
 
Page:
 


You are not logged in. Please log in if you want to post a reply.