User Pass
Home Sign Up Contact Log In
Forum > Discuss GLB Issues With Catch22 > NOT A BUG - CLOSED > CPU is miscounting WR's when a TE is in at WR in a singleback 3 wide formation
robweiss
offline
Link
 
When TE is in at WR the cpu then counts the normal TE at the TE slot as a WR so you show 1WR too many in your inputs

I have ran this since the AI started and never had a problem with it before today's game. I even used the AI tester post game to double check and it showed the Outputs i would have expected.

Input 3WR to 3WR everything else left in default
output 4 variations of a nickle defense (4-2-5 3 CB)

Input 4WR to 4WR everything else left in default
output 3 variations of a Dime defense (4-1-6 4CB)

for some reason I'm sending a Dime (4-1-6 4 CB) onto the field when they showed 3 WR's

http://goallineblitz.com/game/replay.pl?game_id=233433&pbp_id=8006077
http://goallineblitz.com/game/replay.pl?game_id=233433&pbp_id=8009827
http://goallineblitz.com/game/replay.pl?game_id=233433&pbp_id=8006730

On each of these 3 plays my out put should have been a Nickle but was the defense I would have ran for 4 WR. I believe with the 1 TE in at WR and the other TE at the normal TE slot the cpu ends up counting both TE's as WR when calculating the output.
 
Nixx
offline
Link
 
If true that would be a new bug.

What exactly does the AI tester say for the 3 WR formation (what's in parentheses is what's important).
 
deez11010
offline
Link
 
Mine bugged like that a lot last season. For 3 WRs I had a 4-2-5 nickel and for 4 WRs I ran a Dime 4-1-6.

I think there were 4 games that this happened to me where with 3 WRs on the field,we would have a 4-3 defense in leaving a WR uncovered, or would run a 4-2-5 nickel when there were 4 WRs on the field again leaving 1 WR completely uncovered.

I'll see if I can find my posts and the links to the games that it happened. Cost us a few games last season giving up tons and tons of 40+ yard passing plays because of no coverage on a WR.
 
deez11010
offline
Link
 
Check these out



3 LBs in on what should be a Nickel with 1 LB trying to cover a WR
http://goallineblitz.com/game/replay.pl?game_id=179233&pbp_id=7467096

The very next play was the exact same thing
http://goallineblitz.com/game/replay.pl?game_id=179233&pbp_id=7467156

What was really weird, Is I never once had my AI set to blitz any of the safeties. Sometimes I did a CB blitz, but never once a Safety blitz, and both times, both safeties blitzed along with 2 of the 3 LBs.


Same game
3 LBs in on again should be a nickel, this time the FS is on the WR
http://goallineblitz.com/game/replay.pl?game_id=179233&pbp_id=7467556
All 3 LBs blitz and for some reason a CB ran to the front row to get some popcorn during the play.



Even though this was a TD due to the LB and Nickel Back blitzing, it shows how the defense was supposed to be set up. In fact, its the exact same offensive play as the first 2 I linked.
http://goallineblitz.com/game/replay.pl?game_id=179233&pbp_id=7466764


Cost us the game
 
robweiss
offline
Link
 
Originally posted by Nixx
If true that would be a new bug.

What exactly does the AI tester say for the 3 WR formation (what's in parentheses is what's important).


I ran all the parameters for the plays in the tester and was given my 4 variations of my 4-2-5 Nickle
I even went back over the past few game to see if that happened and I over looked it and nothing remotely to what i had happen today. I'm very meticulous with my settings and scouting so I'm very positive I'm not missing anything.
Last edited Dec 2, 2008 17:54:58
 
EagleOtto
offline
Link
 
So it counts it as a 4 WR set? Just wondering, I don't want my ai defaulting to basic if this happens, especially since SB is one of the hardest sets to defend against.
 
robweiss
offline
Link
 
Originally posted by EagleOtto
So it counts it as a 4 WR set? Just wondering, I don't want my ai defaulting to basic if this happens, especially since SB is one of the hardest sets to defend against.


Yes that is what appears to be happening
 
deez11010
offline
Link
 
I guess thats different than what mine was doing. It was running a 3 WR set as a 2 WR set putting my defense at a 4-3 (my basic setting) instead of the nickle (4-2-5).
Last edited Dec 3, 2008 11:48:40
 
Baustin
offline
Link
 
Why would you even have an input for a 4 WR set? Unless it's always counted the TE, there aren't any.
 
deez11010
offline
Link
 
huh?


EDIT:

lol, guess you're right. I thought for sure there was a single back 4 WR set. Guess thats just my Madden playbook crossing my head into my GLB playbook.
Last edited Dec 3, 2008 12:54:30
 
RMiller517
offline
Link
 
Thread locked by moderator.
 


You are not logged in. Please log in if you want to post a reply.