User Pass
Home Sign Up Contact Log In
Page:
 
blankspace
offline
Link
 
When it comes to pass defense, many questions run through a DC’s mind. “Which formation should I use?” “Who should I blitz” All kinds of questions really. But one thing is for certain, a question that pops into my head a lot is “Which zone should I use?” There’s really no zone that works best for everything. Some zones have their strong points, but they also have their weak points that can be exploited by the offense.

With the defensive AI, it’s very tricky to know which zones to use, especially when you have to factor in formations, number of wide receivers, your own formation, and sometimes the down and distance for those who are very specific with the AI, which isn’t a bad thing but try not to over ride settings with it or get confused with mass plays.

So considering all of this, here’s a rundown on the types of zones and what they do with some examples.

Cover 0

Cover 0 isn’t really a zone at all, but rather a man-to-man play. It can be used for a zone, but DON’T. When using Cover 0, which is man-to-man, and you set your AI to “zone” coverage, you pretty much made an oxymoron of a play. Understand? Good.

Since Cover 0 is a man-to-man play, this means some positive things. Your defenders will play in the receivers face, and sometimes your safeties will help double a man, making it harder for the QB to throw to. Also, you always want to blitz at least 4-5 guys. This means that if you are in a 4-3, try sending a LB. If you’re in a 3-4 base defense, send in a linebacker or two to help pressure the CB. You don’t ever want to have a QB sit in the pocket comfortable, with time to throw. This means he will find an open man and not be forced to make a play. Also different blitzing schemes help confuse not only the blockers, but the QB as well.

There are the negatives of the Cover 0 though. Since your players will play in the face of their man they are covering, this means so will your safeties. If your safeties move up, and a certain receiver runs down the field open, this means huge yardage if that completion is made. This is why you don’t want to run a Cover 0 all the time, or your defense will give up huge plays since the lack of safety protection in the backfield.

Here are some examples:

http://goallineblitz.com/game/replay.pl?game_id=161111&pbp_id=8243244 : Notice how the FS lined up against the slot and the SS ran with the RB.

http://goallineblitz.com/game/replay.pl?game_id=145677&pbp_id=8101269 : The FS picks up the TE and the SS helps pick up the other TE to help the LB.

Cover 1

Cover 1 is a good coverage play in my opinion. Pretty much what it does it sends the FS to the middle of the field playing back, and sends the MLB back about 6-9 yards from his starting spot to the middle of the field. Everyone else plays man-to-man. This zone coverage is used quite a bit and is very useful in my opinion, but it can also hurt you.

Since sending your FS all the way back of the field to stop any players from reaching the endzone, some people feel that it’s almost as if you’re taking him out of the play. In a way, I don’t see many statistics proving a FS does a lot in Cover 1, but if you’re more of a conservative person rather than reward/risk, Cover 1 is a good option. The FS alone can be the reason why you would want to use Cover 1 more or less.

Also, since your MLB will be playing zone if chosen to do so in the AI, this means that you shouldn’t blitz too many people, or you run the risk of having a man wide open, possibly a threat that you wouldn’t want to happen at any time. A good idea is that since not every man is in zone, try to send one LB besides the MLB to blitz and shift that play to the side your LB who is going to blitz in on. This should cause pressure and have enough people in pass coverage to cover everyone.

http://goallineblitz.com/game/replay.pl?game_id=145677&pbp_id=8105591 : Notice how the FS backs up into the open field.
http://goallineblitz.com/game/replay.pl?game_id=145677&pbp_id=8104301 : Another one, but not so much pressure on QB, but you see what I mean though.

Cover 2

In my mind, Cover 2 is the most widely used zone coverage play in both GLB and in real life. Using this zone coverage sends the FS towards the right side of the field (in his POV) and the SS to the left side of the field (in his POV). If the AI sets it as man coverage, then the LB’s will do so and so will the CB. But if in zone, the CB will play his spot on that side of the field and not scoot back past 10 yards at maximum, same with LB’s as they move back a little.

Cover 2 is so popular because of the zone each position contains. Each section of the field is protected by someone, except little certain spots such as the deep middle of the field where the FS and SS spate, and when the play develops the area between the OLB’s and CB’s are left open, making it easy for a slant route to take advantage of this coverage zone. In my mind the two most dangerous passes in this zone is the slant route and deep post route taken by a slot receiver especially. The slant route may only give up 5-9 yards, but the deep post can be a game difference play.

Blitzing LB’s out of zone coverage can have some rewards, but the man taken off of the field can be costly with blown coverage. This is a reason why having quick LB’s can only help out your defense in every aspect in the game. Causing pressure can help though, seeing if the QB seems to hurry his pass or feel uncomfortable in the pocket. I think if there was one LB to blitz in a 4-3, it should be either the ROLB or MLB seeing that the LOLB should pick up the TE, but not both, or it takes out the right side and middle leaving a huge hole for the WR or TE to go to.

http://goallineblitz.com/game/replay.pl?game_id=145614&pbp_id=7537594 : More of a Cover 2-Man play, notice how the WR, slot and TE get doubled, but safeties split.

http://goallineblitz.com/game/replay.pl?game_id=161126&pbp_id=2037963 : A more zone play, good pressure on the QB and great way of picking up the HB.

Cover 3

Some people don’t really like this zone because it gives up to many yardage in the shorter and medium distance of the QB. Cover 3 is basically a weaker Prevent play in which both CB#1 and CB#2 drop deep and so does the FS. The LB’s play a zone around their position and if you have any extra CB’s such as nickel or dime, the extra CB’s will either play man or zone coverage from where they are standing.

One advantage I see in a Cover 3 is in a 3rd and long situation, such as 3rd and 11+ yards to go. The three dropped defensive backs kind of protect the first down marker depending on the AI setting for Coverage Distance. In a 3rd and 11-15 I would go medium coverage distance, and anything greater than 15 yards should be a long coverage distance. I wouldn’t really suggest going for a short coverage distance in Cover 3 because of the fact that the play is designed for a protection of the backfield and for longer pass plays, so going short would almost defeat the purpose seeing that running the Cover 3 in a 2nd and short would be a poor choice to use.

Really the biggest problem I see in Cover 3 is the fact that it can be picked apart by small pass plays. This may not seem so bad but if your opponent is on their final drive and all they need is a field goal to win, these small passes pick up yardage. You want to be careful using the Cover 3. Try not using it to much or usual, but every now and then when the first down distance is long.

http://goallineblitz.com/game/replay.pl?game_id=153792&pbp_id=6990704 : A weird play, but it’s a Quarter Defense, Cover 3 possibly man coverage.

http://goallineblitz.com/game/replay.pl?game_id=125407&pbp_id=3733770 : Could have been a Cover 3 play as you can see the FS and CB’s going straight back.

Cover 4

Cover 4 is basically your prevent play. Personally I saw real flaw in this when a team of mine was winning and the opponent was on their last drive. They needed a touchdown to win but they marched down the field when this play was forced by passing it in small distances. They didn’t get the touchdown, but they were close to field goal range. Only use this if you have to protect lead! I never use it in normal plays.

The Cover 4 Send all CB’s and safeties towards the back of the field so that the long pass can be stopped. This cover zone also sends out the LB’s back a bit toward the first down marker.

http://goallineblitz.com/game/replay.pl?game_id=145677&pbp_id=8108452 : All the DB’s go back and LB’s move back to.

http://goallineblitz.com/game/replay.pl?game_id=145677&pbp_id=8108339 : Passes like this is what hurts the defense in Cover 4. I think they passed it to the HB 3 times like this.

Tips:

Zones have their strong points and weaknesses, so which is the best to use? Honestly, the combination of them makes a defense stronger. Different situations such as formation, number of WR’s, the down, yards to first down, and number of people you plan to blitz and who you will blitz make choosing one zone over the other hard to factor in. Try different schemes, mix up zone and man, send that CB#3 to blitz the QB in a Cover 3, and more stuff like that.

A good defensive coordinator has to be crafty, witty, and creative. You should be able to visualize a play in your head. When I try to visualize I actually draw the X’s and O’s of it. Granted my drawing skills are limited, I can understand better when I can see it. Once you can visualize and draw it out, go to your AI and see if you can set it up in a friendly and see how it works. Was it exactly like you planned? Different? Why? Did it work? Did it backfire? Questioning yourself also makes you better, just don’t talk to yourself.
 
al0x
offline
Link
 
Again, great info.
 
blankspace
offline
Link
 
Thanks, and if any wants to all these guides will be on my own forum outside of GLB. If anyone would like to help just hit me up a PM
 
the man of doom
Miracles happen
offline
Link
 
Originally posted by alex2544
Again, great info.


 
Forbin
offline
Link
 
Title and use of "Zone" to define the coverage shells is going to confuse new owners/GMs.
 
blankspace
offline
Link
 
Originally posted by Forbin
Title and use of "Zone" to define the coverage shells is going to confuse new owners/GMs.


Covers are mostly zones, I clearly explain it in detail so if the new owners/GM's read my guide instead of skim it they shouldn't get confused.

Thanks for the consideration though.
 
Knick
Sknickers
offline
Link
 
Originally posted by alex2544
Again, great info.


 
blankspace
offline
Link
 
Also Nixx, you can add this to Wiki if you want.
 
blankspace
offline
Link
 
bumpity
 
Forbin
offline
Link
 
Originally posted by blankspace
bumpity


Read the forum rules.
 
blankspace
offline
Link
 
Originally posted by Forbin
Originally posted by blankspace

bumpity


Read the forum rules.


I know the rules, trust me. If you seriously have nothing constuctive to say then why bother to post in a guide that tries to help new players?
 
al0x
offline
Link
 
PM a mod to get it stickied. Then PM Catullus 16 to put it in links. I got him to put the other in for you.
Last edited Oct 18, 2008 11:25:44
 
Forbin
offline
Link
 
Originally posted by blankspace
Originally posted by Forbin

Originally posted by blankspace


bumpity


Read the forum rules.


I know the rules, trust me. If you seriously have nothing constuctive to say then why bother to post in a guide that tries to help new players?


If you know the rules, why don't you follow them instead of thinking your mediocre guide is above the law?
 
blankspace
offline
Link
 
Originally posted by Forbin
Originally posted by blankspace

Originally posted by Forbin


Originally posted by blankspace



bumpity


Read the forum rules.


I know the rules, trust me. If you seriously have nothing constuctive to say then why bother to post in a guide that tries to help new players?


If you know the rules, why don't you follow them instead of thinking your mediocre guide is above the law?


See PM Forbin.
 
al0x
offline
Link
 
Originally posted by alex2544
PM a mod to get it stickied. Then PM Catullus 16 to put it in links. I got him to put the other in for you.


 
Page:
 


You are not logged in. Please log in if you want to post a reply.