User Pass
Home Sign Up Contact Log In
Forum > FAQ's, Player Guides and Newbie Help > Get to Know Your Defense: Guide to Positions
Page:
 
blankspace
offline
Link
 
Hi everyone, I'm blank and lately I've been making guides for the defensive side of GLB, and this is my first one finished. It's not done, but expect more like this on my new forum outside of GLB which will be up in about a few weeks. I'll be editing this as often as I can to make sure there is enough information and to fix mistakes (There's probably a lot ). Umm, that's it really. Any criticism is helpful, but let's try not to bash me ok? lol

~~~~~~~~~~~~~~~~
Let’s get started. The defense is compromised of 11 men on the field that you can choose from. These positions are very important to know and understand, and by understand, I don’t mean know what they are abbreviated for. I mean, you should know what each player does, should do, what his job is, importance on the team, etc. Of course every position is important, but to know why the position itself is important is great basic knowledge of the game.

I’ll break down each position in different segments to make things easier and more organized rather going everywhere through the guide. Alright, here are the positions of your defense. Get to know them well.

• NT
• DT
• DE x2
• MLB
• LOLB
• ROLB
• ILB x2
• CB x2
• FS
• SS

Notice I put an x2 for CB, but I didn’t group the NT and DT together, or the LOLB and ROLB together. Yes, there’s a reason I did that. CB’s should be built the same, which we’ll cover when we get to it, but ROLB and LOLB don’t usually have the same responsibilities, And NT and DT are quite similar, but there are some key differences between the two that in my opinion separate them. Also done for the ILB.

Nose Tackle (NT)

This player should be your strongest, biggest defensive tackle at this position. Especially in a 3-4 defense when the NT lines up against the center and guards and doesn’t have the help from the extra DT like an 4-3 defense provides. In a 3-4 defense, your NT should be built accordingly on strength and vision as his two most important skills, followed by agility and tackle. When you see a DT with high strength and lower agility, there is no doubt in my mind that he should be played at the NT spot.

Why is it important to have a strong, solid NT though? Obviously as a defensive lineman, you have to have strength since GLB’s offensive line is all pumped into strength and blocking. But one thing special about a NT is that he gets extra attention at the line of scrimmage. When the ball is hiked, usually your NT will be double teamed by the RG and C of the offense. Not all the time though, as run plays are ran to the left, but most run plays go to the right, where your NT is. You don’t want your NT to be pushed back 3 yards to allow a big gain on a rushing play do you? Strength is the key to a solid NT, and vision to know what play is developing and where to go.

Defensive Tackle (DT)

Now that we are done talking about the NT, what makes the DT different? First off, in a 3-4 defense there is no second DT, so this guy is out if you play a 3-4. This doesn’t mean if you run a 3-4 you shouldn’t need a DT. You might use a 4-3 some plays in your AI, and it’s always good to mix up and add depth to your lineup. But when you do use him for the 4-3, he lines up over the LG. This is a good thing because this ultimately means that he can move to the left if the RB is going for a dive play, or move to the right if it’s a RB Slam or Sting, which means the RB goes in between the G and T.

Since your DT doesn’t get doubled team as much as a NT, you can settle down with strength and add more points into agility then speed. You don’t want to be neglect strength as you will then be pushed back yardage during run situations and beat at the line in pass plays, which is something you want to avoid. Your DT is to be a disruptive player at the line of scrimmage. He may not get stats, but his playing on the field should show results by how well the team does on the ground and QB hurries/sacks.

Defensive End (DE)

Of course, probably the most over powered position in GLB, the DE. Obviously the DE’s main job is to put pressure on the QB. Of course, that’s the only thing that comes to mind nowadays when making DE. But you have to remember that the DE is also responsible for containing the run from the outside and making sure the RB doesn’t sprint outside the hash marks, meaning getting outside of them. Tackles for loss is a key stat for a DE in my opinion because it causes the offense to lose yardage and morale making it harder to get the first down.

Most DE’s these days (Season 5) are completely ignoring strength and pumping everything into agility and speed. Another thing some DE’s are missing is vision, which is obviously a big mistake. Vision itself for a DE is gold. Not only does it help the DE learn if the play is a pass or run faster, he can also read the offensive line blocking scheme to. Will the linemen pinch in, or will they spread block? Who’s going to get doubled team and where is the hole going to be? All these things and lots more rely on vision.

Most dominant forces are DE’s because of the 60-100 sacks a season. Bort has already recognized this and will fix this probably and hopefully this offseason.

Middle Linebacker (MLB)

Ah, the muscle of the linebacker core. The MLB is generally the strongest of your linebackers, and is used only in a 4-3 defense. A great thing about the MLB is his SA Defensive General, which makes the linebacker core even better. Why is the MLB usually the strongest though? Well, his name gives it away. Your LB is lined up center with the offensive line. He is like a faster NT, there to stuff the run, and I generally like to keep my MLB in zone or with the TE.

Since he will always be lined up against the offensive line no matter the shift, strength is important for your MLB since he will take a pounding from that offensive line. And since most of the runs are inside runs, your MLB always has a chance to stop the ball carrier from getting extra yardage, which is why vision is also very important. This should allow your MLB to see which play is brewing before it is done.

Since your MLB will be chasing down RB’s and TE’s, speed and strength have equal importance to a MLB, but not as much for a ROLB or LOLB in my opinion. Agility should also be trained accordingly.

Left Outside Linebacker (LOLB)

Your LOLB can be a serious weapon if used right. Your LOLB will be used for blitzing, filling in the gaps during runs, zone coverage and mostly playing man on the TE. Since the TE is on the right side of the formation majority of the times, it’s wise to make sure your LOLB pick him up, and if not him at least your MLB. But your LOLB should be the one to pick him up, not your SS as this can lead to blown coverage as your SS comes up to man up, he leaves the area behind him open. This is especially dangerous if running a Cover 0, as the FS won’t be behind him in a usual cover zone.

Another person your LOLB will pick up is the HB if he runs a route. This will mostly be a line of scrimmage route so your LOLB should be able to pick him up fast. Since your LOLB will be playing pass/blitz, you should make sure to have a decent agile LOLB. You wouldn’t want a slow LB blitzing or chasing down the HB or TE. This would only cause problems. Vision is also another importance here. You wouldn’t want your LOLB clueless in which play is developing would you? Or which man to pick up.

Your LOLB will be responsible for shifting to. This is done by the defensive AI, but when shifting to the strong side, he will move more toward his left on the outside shoulder of the RT or TE. If shifted towards the weak side, he moves toward where the old MLB spot use to be.

Right Outside Linebacker (ROLB)

When I think of ROLB, I think of Derrick Brooks in his prime. Fast, smart, agile, can cover in zone of man and can stop the run when it comes his way. This is exactly how it is in GLB for ROLB. I couldn’t trust a ROLB who had any low attribute lacking in his skill set. If he had high speed but poor agility, I really couldn’t trust him in a pass defense. If he had high tackling but low strength, how can you count on him to make the sure tackle? You can’t. And I definitely don’t trust any player with low vision, especially a LB.

Your ROLB is responsible for a lot of duties in the pass defense just like the LOLB. He sometimes has to pick up the HB or weak TE, sometimes even the FB. Another thing that an ROLB does differently sometimes is that he sometimes goes man-to-man with the slot receiver. Although this sometimes isn’t highly suggested, if you have a good speedy/agile ROLB and not so good depth at CB, it’s good to know that you can rely on your ROLB to get the job done. He may not make a INT and go for 6 points, but if he can contain his man and give up minimal yardage if any, that’s a win in the ROLB book.

Shifting the ROLB to the weak side is a play used by many DC’s. A lot of experienced DC’s have found ways to blitz the weak side because of a bad pickup block assignment by the LT and HB. Although this isn’t really news, more creative ways are being used to rack up sacks with the ROLB. Imagine a Shawn Merriman playing ROLB. Yep, that’s exactly what it’s like.

Inside Linebackers (ILB)

Your two ILB’s are the same thing as an MLB in the 4-3 defense. In a 3- 4 defense, you lose one DT but you gain an extra linebacker, which then splits your linebackers into the LOLB, LILB, RILB, and ROLB. In my honest opinion, I see no major difference between the RILB and LILB. If anything, most runs are on the right side, so your LILB will see more action than your RILB. Your RILB should be a tad bit faster than your LILB, and your LILB should be a tad stronger than your RILB.

The reason why I say this is because of the run. Since majority of runs are to the right side, your LILB will be blocked by one of the open linemen left open in the 3 defensive linemen situation. Most likely a RT, you wouldn’t want your LILB to be pancaked by him, so strength will help out more than speed in this situation. Your RILB should have the speed so that he can get to that hole the line will try to create and stuff the run. Both ILB’s should really work together to do this.

Cornerback (CB)

The corner back position is a fairly easy one to understand. CB’s are there to stop the pass, shut down WR’s, and stop sweeps/pitches from RB’s coming their way. Since you don’t have to worry too much about RB’s plowing over your CB, you shouldn’t need to worry about putting many points in tackling and strength.

Since your CB should be able to keep up with WR’s all game, speed, agility and vision will be your most important skills. Your CB shouldn’t really line up against a TE as the TE will have a strength and size advantage. Other things that your CB should train or work on should be jumping and catching, something that is so under rated by most DB’s. Training jumping can be a big difference between being beat for ten yards or swatting down the ball. And points in catching could be the difference between a pass deflection or an interception.


The CB is usually backed up by either safeties, but sometimes during blown coverage a safety may not pick up their spot like it’s suppose to because of AI, so you don’t want your CB to get beat deep or that spells trouble for your defense. This is where speed and agility play a roll. Agility is useful for your CB to keep up with quick cut routes, such as a 5 and in, post, curls and other routes that require fast action. Speed is absolute necessary and also your basic tool. Without speed you will be beat. Speed is also key for those DC’s who like to blitz CB2 or CB3.

Here it comes, the one word that I use a lot. Vision! Vision is pretty much awareness. Awareness is pretty much football smarts. You want to have sufficient amount of vision stored into your CB to make sure he doesn’t bite pump fakes and to know where his WR is going.

Free Safety (FS)

Although your FS may not get a lot of stats, like tackles, pass deflections, interceptions and other stuff, your FS is basically sometimes your last man to stop a ball carrier from taking it 70 yards into the end zone. The FS position is usually a zone position, as it drops back in all Covers, and usually man to man with TE’s, RB’s and sometimes helps double the WR. Your goal for your FS should be to minimize the amount of plays he goes man-to-man with someone. Because since he is the last man to stop someone from breaking out, if he isn’t in the backfield, this leaves a dangerous vertical pass threat.

Since the FS is mostly in cover plays, or zone plays, where does he go? In Cover 1, your FS drifts to the middle of the field deep, about 15-20 yards from the line of scrimmage and makes sure no big play goes past him. This is basically your last man on defense to stop a ball carrier from reaching the end zone. Some people don’t like running this play regularly because it takes the FS out of the action, but more conservative DC’s tend to like Cover 1 as you put your FS to keep from giving up huge gains for 6 points.

Cover 2 will send your FS toward the side line to his right, drifting from his original spot to the right about 10-15 yards away from the line of scrimmage.
Cover 3 I think sends your FS floating backwards from his original spot down the field about 15-20 along with both CB’s. Cover 3 isn’t a great zone coverage to use in my opinion as it leaves a lot of holes in your defense, but it’s a safer play to use when in a 3 and long situation.

Cover 4 is like a Prevent play. Your FS will go down about 20-30 yards from the line of scrimmage backwards from his original position and will make sure no receiver gets past him. Shouldn’t be used unless in a game ending drive, 4th and long, etc.

Strong Safety (SS)

The “jack of all trades” man. An undersized LB, powerful DB and play maker on the ball carrier, a star at this position is a must and need for any defense looking to minimize the yardage they give up and increase the number of turnovers on their team. I think of a SS as the man who causes fumbles, disrupts the pass and stops the HB when running on the right side. Those are the three big duties for the SS.

The SS usually helps either double team the TE of WR on the right side, pick up the slot if he has to or sometimes play man on the RB. Sometimes the SS is confusing to understand as his pathing and selection of man is questionable, especially since I own one. Since your SS is a combination of different players and is a needed play maker, his skill set should be more balanced than any other position. This may take a while to do if a player, and hard to find if recruiting for one.

Usually you would want your safety to help the CB with his WR or to play man on the TE if in Cover 1. You don’t want your safety playing up close man if there is no FS backing up to help keep the backfield safe, or it sometimes spells disaster. In Cover 2 your safety backs up to the right side of the field and helps ensure that WR doesn’t get that big catch over the CB. In Cover 3 I think your SS plays up in the middle of the field around where a TE or slot receiver may be.
Last edited Oct 17, 2008 13:36:53
 
al0x
offline
Link
 
Very good. It will be very useful to new players.
 
blankspace
offline
Link
 
Thanks, hopefully new players read this and it helps. Always glad to hear feedback.
 
al0x
offline
Link
 
I just made a guide to help new GMs and got it stickied. Just means you don't have to keep bumping it up.
 
blankspace
offline
Link
 
Well hopefully this gets stickied, if not I'm hoping someone will bump it up to make sure players read this.
 
Quas
offline
Link
 
bump :0
 
blankspace
offline
Link
 
Thanks Quas, much appreciated
 
crazy454
what
offline
Link
 
+!
 
merk
offline
Link
 
Great guide...one small comment is that you once refer to the CB as the RB: "Your RB shouldn’t really line up against a TE as the TE will have a strength and size advantage."
Last edited Oct 17, 2008 12:20:40
 
blankspace
offline
Link
 
Thanks merc, fixed!
 
Grantdawg
offline
Link
 
Nice job! Very good guide.
 
RIP Al Davis
offline
Link
 
Originally posted by blankspace
Defensive Tackle (DT)
when you do use him for the 4-3, he lines up over the RG.


He lines up against the LG. Other than that, good guide.
 
blankspace
offline
Link
 
Originally posted by Kira
Originally posted by blankspace

Defensive Tackle (DT)
when you do use him for the 4-3, he lines up over the RG.


He lines up against the LG. Other than that, good guide.


lol I'm so dyslexic. Thanks. Fixed.
 
Nixx
offline
Link
 
You should add this to the wiki. I'll send you an invite to the wiki private forum, it has tips on editing. It's really not that hard to figure out the basics, and I can help with the initial formatting (then you could do edits when you change something in the guide).
 
blankspace
offline
Link
 
Originally posted by Nixx
You should add this to the wiki. I'll send you an invite to the wiki private forum, it has tips on editing. It's really not that hard to figure out the basics, and I can help with the initial formatting (then you could do edits when you change something in the guide).


I wish I would've saw this before I sent PM lol. Thanks, I'll see what I can do. Invite accepted.
 
Page:
 


You are not logged in. Please log in if you want to post a reply.