User Pass
Home Sign Up Contact Log In
Forum > Discuss GLB Issues With Catch22 > NOT A BUG - CLOSED > Preseason Games: Kinks / Bugs? Acknowledged
Page:
 
Link
 
Originally posted by Modok
Drops seem to be up across the board.



yea, I'll get to that.
 
lukin83
offline
Link
 
I set up the defensive AI so that one ILB would blitz every time we rolled out the 3-4 in the 4th Quarter, but it seemed to work randomly. I had one input for 2 WR formations with 3 outputs (1 where we come out in a nickel, 1 where we come out in 3-4 with 1 max blizter and the LILB set to 100%, and 1 where we come out in 3-4 with 1 max blitzer and the RILB set to 100%). Here is an example of a 4th Quarter play where it is quite obvious that neither ILB blitzes: http://goallineblitz.com/game/replay.pl?game_id=79515&pbp_id=94908
 
Link
 
Originally posted by lukin83
I set up the defensive AI so that one ILB would blitz every time we rolled out the 3-4 in the 4th Quarter, but it seemed to work randomly. I had one input for 2 WR formations with 3 outputs (1 where we come out in a nickel, 1 where we come out in 3-4 with 1 max blizter and the LILB set to 100%, and 1 where we come out in 3-4 with 1 max blitzer and the RILB set to 100%). Here is an example of a 4th Quarter play where it is quite obvious that neither ILB blitzes: http://goallineblitz.com/game/replay.pl?game_id=79515&pbp_id=94908


two WR? or two receivers? because there was a TE in there, which i think counts as a third receiver?

 
lukin83
offline
Link
 
Originally posted by Twilightbeckoned
Originally posted by lukin83

I set up the defensive AI so that one ILB would blitz every time we rolled out the 3-4 in the 4th Quarter, but it seemed to work randomly. I had one input for 2 WR formations with 3 outputs (1 where we come out in a nickel, 1 where we come out in 3-4 with 1 max blizter and the LILB set to 100%, and 1 where we come out in 3-4 with 1 max blitzer and the RILB set to 100%). Here is an example of a 4th Quarter play where it is quite obvious that neither ILB blitzes: http://goallineblitz.com/game/replay.pl?game_id=79515&pbp_id=94908


two WR? or two receivers? because there was a TE in there, which i think counts as a third receiver?



2 WR. There is no AI setting for simply receivers.

ETA: I also had this set as my only 4th Quarter input, so nothing else should have overridden it.
Last edited Jul 29, 2008 14:53:45
 
Link
 
Originally posted by lukin83
Originally posted by Twilightbeckoned

Originally posted by lukin83


I set up the defensive AI so that one ILB would blitz every time we rolled out the 3-4 in the 4th Quarter, but it seemed to work randomly. I had one input for 2 WR formations with 3 outputs (1 where we come out in a nickel, 1 where we come out in 3-4 with 1 max blizter and the LILB set to 100%, and 1 where we come out in 3-4 with 1 max blitzer and the RILB set to 100%). Here is an example of a 4th Quarter play where it is quite obvious that neither ILB blitzes: http://goallineblitz.com/game/replay.pl?game_id=79515&pbp_id=94908


two WR? or two receivers? because there was a TE in there, which i think counts as a third receiver?



2 WR. There is no AI setting for simply receivers.

ETA: I also had this set as my only 4th Quarter input, so nothing else should have overridden it.



were there any other conditions involved? unless it counts that te as a wr, then yea you seem to have the bases covered
 
lawdog
offline
Link
 
Originally posted by Juan Fiddy
Originally posted by lawdog

How would the following WR formation set up:

WR1: Joe1
WR2: Joe2, Joe3
WR3: Joe2

Who would play the slot position? I'm trying to find a way to put WR2 in the slot on a 3 WR set.


The way I would handle that is to leave the WR2 slot Blank, putting Joe2 into the #3 position. This will cause Joe2 to automatically get placed into the #2 slot during a 2 wideout play, and once three wideouts come out it move Joe2 to WR3, and automatically populate Joe3 into WR2 given your base order is Joe1-3.

If you did it in the order you discribe, I could only assume it will populate in order. So if Joe2 has enough energy he will be put into WR2, and WR3 will autopopulate, but if Joe2 doesn't have enough energy then he will be subbed for WR2 and then will be forced into the WR3 slot.


This is exactly what I was thinking. Thanks.
 
lukin83
offline
Link
 
Originally posted by Twilightbeckoned
Originally posted by lukin83

Originally posted by Twilightbeckoned


Originally posted by lukin83



I set up the defensive AI so that one ILB would blitz every time we rolled out the 3-4 in the 4th Quarter, but it seemed to work randomly. I had one input for 2 WR formations with 3 outputs (1 where we come out in a nickel, 1 where we come out in 3-4 with 1 max blizter and the LILB set to 100%, and 1 where we come out in 3-4 with 1 max blitzer and the RILB set to 100%). Here is an example of a 4th Quarter play where it is quite obvious that neither ILB blitzes: http://goallineblitz.com/game/replay.pl?game_id=79515&pbp_id=94908


two WR? or two receivers? because there was a TE in there, which i think counts as a third receiver?



2 WR. There is no AI setting for simply receivers.

ETA: I also had this set as my only 4th Quarter input, so nothing else should have overridden it.



were there any other conditions involved? unless it counts that te as a wr, then yea you seem to have the bases covered


I did have one input/output listed before this one, but it had the requirement of 180 seconds left in the quarter so that shouldn't have been a problem.

My requirements for the input in question were Spot (Any), Down (1 to 4), Opponent's Formation (Any), # of WRs (1-2).
 
czman
offline
Link
 
Originally posted by lukin83
I set up the defensive AI so that one ILB would blitz every time we rolled out the 3-4 in the 4th Quarter, but it seemed to work randomly. I had one input for 2 WR formations with 3 outputs (1 where we come out in a nickel, 1 where we come out in 3-4 with 1 max blizter and the LILB set to 100%, and 1 where we come out in 3-4 with 1 max blitzer and the RILB set to 100%). Here is an example of a 4th Quarter play where it is quite obvious that neither ILB blitzes: http://goallineblitz.com/game/replay.pl?game_id=79515&pbp_id=94908


Looks like the ROLB blitzed. Not sure if you had fat fingers or the sim just blitzed the wrong guy.
 
lawdog
offline
Link
 
Originally posted by Juan Fiddy
Originally posted by lawdog

How would the following WR formation set up:

WR1: Joe1
WR2: Joe2, Joe3
WR3: Joe2

Who would play the slot position? I'm trying to find a way to put WR2 in the slot on a 3 WR set.


The way I would handle that is to leave the WR2 slot Blank, putting Joe2 into the #3 position. This will cause Joe2 to automatically get placed into the #2 slot during a 2 wideout play, and once three wideouts come out it move Joe2 to WR3, and automatically populate Joe3 into WR2 given your base order is Joe1-3.

If you did it in the order you discribe, I could only assume it will populate in order. So if Joe2 has enough energy he will be put into WR2, and WR3 will autopopulate, but if Joe2 doesn't have enough energy then he will be subbed for WR2 and then will be forced into the WR3 slot.


The only question I have about this scenario is the following:

WR depth chart:
Joe1
Joe2
Joe3

WR1: blank
WR2: blank
WR3: Joe2

According to your statement above, this would make Joe2 the WR3 position in 3 WR sets, and Joe2 the WR2 in 2 WR sets. However, the SIM might work this way. Since Joe2 is set in the WR3 position, the only time he comes in the game is when WR3 is playing. The big question is where does the SIM look first? The depth chart or the specific WR position?
 
smeberen
offline
Link
 
Has anyone brought up that QB's are completing passes at a rate of about 33%. I am seeing QB's going 4 for 29 and 0 for 9. Just horrible numbers.

The bad QB's complete around 50% in real life.
 
Modok
offline
Link
 
Originally posted by smeberen
Has anyone brought up that QB's are completing passes at a rate of about 33%. I am seeing QB's going 4 for 29 and 0 for 9. Just horrible numbers.

The bad QB's complete around 50% in real life.


Part of that had to do with the drops.
 
Link
 
Originally posted by Modok
Originally posted by smeberen

Has anyone brought up that QB's are completing passes at a rate of about 33%. I am seeing QB's going 4 for 29 and 0 for 9. Just horrible numbers.

The bad QB's complete around 50% in real life.


Part of that had to do with the drops.


I think so as well.

 
smeberen
offline
Link
 
I think I will be running a lot tonight in my game.

Might as well test out how our running game is. Hopefully the passing is better by Thursday.
 
lukin83
offline
Link
 
Originally posted by czman
Originally posted by lukin83

I set up the defensive AI so that one ILB would blitz every time we rolled out the 3-4 in the 4th Quarter, but it seemed to work randomly. I had one input for 2 WR formations with 3 outputs (1 where we come out in a nickel, 1 where we come out in 3-4 with 1 max blizter and the LILB set to 100%, and 1 where we come out in 3-4 with 1 max blitzer and the RILB set to 100%). Here is an example of a 4th Quarter play where it is quite obvious that neither ILB blitzes: http://goallineblitz.com/game/replay.pl?game_id=79515&pbp_id=94908


Looks like the ROLB blitzed. Not sure if you had fat fingers or the sim just blitzed the wrong guy.


I double checked the settings and they are the same as the ones posted above. I believe the ROLB blitzed because he was manned up on the FB and the FB stayed in to block.
 
NFLVols
offline
Link
 
Originally posted by smeberen
Has anyone brought up that QB's are completing passes at a rate of about 33%. I am seeing QB's going 4 for 29 and 0 for 9. Just horrible numbers.

The bad QB's complete around 50% in real life.


Yea, I've played 2 games so far....all 4 QB's have had less than 40 percent completion percentage......but there has not been a single INT thrown. Also, no fumbles in either game, but plenty of missed tackles and drops...

 
Page:
 


You are not logged in. Please log in if you want to post a reply.