User Pass
Home Sign Up Contact Log In
Forum > Discuss GLB Issues With Catch22 > NOT A BUG - CLOSED > Blitzing is BROKEN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Page:
 
lukin83
offline
Link
 
Originally posted by Bort
Originally posted by lukin83

Maybe you could create an option somewhere that allowed DCs to choose which OLB stays on the field in nickel?


Eventually, but that's not something I can just add in 5 minutes.


I thought everything was programmed at your command.


For what it is worth, I prefer having the ROLB out there in the nickel.
Last edited Jul 30, 2008 13:42:46
 
lukin83
offline
Link
 
Bort, if you are still around, I have a question about blitz settings.


If I set the basic tactics to 100% blitz and have an output with 1 max blitzer with the LOLB set to 100% blitz (everyone else set to 0%), will the LOLB blitz every time or does max blitz mean there is still a possibility of 0 blitzers on the play?

If it is the latter, would my odds increase by setting max blitzers to 6 and leaving all players but the LOLB set at 0%?
 
Bort
Admin
offline
Link
 
Originally posted by lukin83
Bort, if you are still around, I have a question about blitz settings.


If I set the basic tactics to 100% blitz and have an output with 1 max blitzer with the LOLB set to 100% blitz (everyone else set to 0%), will the LOLB blitz every time or does max blitz mean there is still a possibility of 0 blitzers on the play?

If it is the latter, would my odds increase by setting max blitzers to 6 and leaving all players but the LOLB set at 0%?


the basic setting only applies to field you leave blank. If you want the LOLB to blitz every time, set LOLB to 100%.
 
Link
 
Originally posted by San Diego Chargers
Originally posted by Bort

Originally posted by San Diego Chargers


Hey Bort, could you please check my team's (Kilkenny) AI to see if there's anything wrong with the 2nd/3rd and short inputs/outputs. Every output I have for these situations has at least one blitzes yet there were numerous occasions today when nobody blitzed. Thanks.


Make sure you check the order of the inputs (highest ones match first) and are not so specific that you rule out certain situations that you didn't think about. I see that most of your inputs are set to 0-2 receivers, and there are plenty of situations where there would be 3 or more receivers which then wouldn't match.


Thanks for the reply. The way I have my AI set up is with 5 WR and 4 WR at the top. Whenever the offense comes out in those formations, I want my D in Dime or Quarter. After that, I have stuff like Goalline, then all of my down/distance settings with 0-2 WR's. For these short yardage plays they were in 2 WR sets, so I figured it would skip down to the suitable down/distance inputs and choose one of the outputs (all blitzes). Another odd play I noticed (don't have the link off hand) was on a first and 10. 1st down, 0-2 WR is the lowest input on my list since it's the most vague. Problem is, the offense lined up in a 2 WR set on first and 10 and we came out in a dime formation. My only input with a Dime output is 4 WR, and after double checking I had opponent WR's set from 4 to 4. Am I missing something here? Thanks for all your help and hard work Bort


Bort could you please address my issues in this post? Thanks.
 
Bort
Admin
offline
Link
 
AHA! I just found a typo in a couple sections of the LB blitzing % code. Some LB positions were inheriting the LOLB position's settings, so if you had LOLB set to zero they wouldn't blitz.
 
lukin83
offline
Link
 
Originally posted by Bort
AHA! I just found a typo in a couple sections of the LB blitzing % code. Some LB positions were inheriting the LOLB position's settings, so if you had LOLB set to zero they wouldn't blitz.


Awesome! That likely solves my problem.
 
Bort
Admin
offline
Link
 
Originally posted by lukin83
Originally posted by Bort

AHA! I just found a typo in a couple sections of the LB blitzing % code. Some LB positions were inheriting the LOLB position's settings, so if you had LOLB set to zero they wouldn't blitz.


Awesome! That likely solves my problem.


That likely solves everybody's problems, haha.
 
Link
 
Wooooo! Go Bort
 
Shorteous
offline
Link
 
Way to go bort, I must say you are doing an excellent job during the preseason. On top of alot of the bugs going on!!!! I'm impressed and grateful to your dedication as a DEV.

I eagerly await the next scrimm.

Last edited Jul 30, 2008 14:18:22
 
dfitzo53
offline
Link
 
Originally posted by Bort

No, actually, it only changes the play call based on play recognition when it's a run and they player is set to go into coverage.

I've been testing this recently and it seems to work on my test machine, but sometimes it looks as though players aren't blitzing (even though they are trying to) on run plays because they are positioning themselves to cut off the runner.


Here's a play that's an example of a MLB not blitzing when he's been called to.
http://goallineblitz.com/game/replay.pl?game_id=78381&pbp_id=310359

I've triple checked my settings, and I don't have very many zone plays, so I have to believe it's calling the right play. The MLB just isn't blitzing even though the rest of the play is correct.
 
Link
 
Originally posted by dfitzo53
Originally posted by Bort


No, actually, it only changes the play call based on play recognition when it's a run and they player is set to go into coverage.

I've been testing this recently and it seems to work on my test machine, but sometimes it looks as though players aren't blitzing (even though they are trying to) on run plays because they are positioning themselves to cut off the runner.


Here's a play that's an example of a MLB not blitzing when he's been called to.
http://goallineblitz.com/game/replay.pl?game_id=78381&pbp_id=310359

I've triple checked my settings, and I don't have very many zone plays, so I have to believe it's calling the right play. The MLB just isn't blitzing even though the rest of the play is correct.


I'm guessing that the MLB is taking on the ROLB's role, the error that Bort just found.
 
dfitzo53
offline
Link
 
Just saw your post Bort, thanks for the update.
 
Mike Rogers
Lead Tester
offline
Link
 
Bort is it possible to have only the positions on the field have editable Blitz boxes??

This would mean that everyone knows what positions are in on each play and would avoid a lot of the bug reports in the future.

If thats too hard maybe just add a full 'players on field' list to the drop downs next to each defense type???
 
foshizzel17
my drizzt
offline
Link
 
Originally posted by Bort
Originally posted by lukin83

Originally posted by Bort


AHA! I just found a typo in a couple sections of the LB blitzing % code. Some LB positions were inheriting the LOLB position's settings, so if you had LOLB set to zero they wouldn't blitz.


Awesome! That likely solves my problem.


That likely solves everybody's problems, haha.



I was getting worried about my settings for a second there. And as far as which LB stays in on Nickel package(LOLB,ROLB) it doesnt matter as long as it stays the same.

 
Bort
Admin
offline
Link
 
Originally posted by Mike Rogers
Bort is it possible to have only the positions on the field have editable Blitz boxes??

This would mean that everyone knows what positions are in on each play and would avoid a lot of the bug reports in the future.

If thats too hard maybe just add a full 'players on field' list to the drop downs next to each defense type???


Damn, that's a good idea. I bet I could do that without TOO much trouble. I think I'll work on ironing out the random bugs first though.
 
Page:
 


You are not logged in. Please log in if you want to post a reply.