Originally posted by Tim Harper
Originally posted by Bort
Let's say I have a power back with:
100 STR
70 Carrying
50/60ish Spd/Agi
8-10 in Power Through and Lower Shoulder type skills
15 in +brk tackle VA's
perhaps some AEQ with +brk tackle type stuff too
I've seen plenty of power backs with builds similarish to this, no?
The question I pose to the community (and this is often a topic of much debate) is: what sort of tackling/strength/SA's do you think you should need to consistently stop this guy?
I've seen answers ranging from "soft cap str/tck should be enough" to "You should need 100 tackling skill and at least 70-80 strength."
I will keep my opinion to myself for the moment to keep from tainting anyone else's opinion.
Tackling = should be at 50 regardless of the back your stopping. That is a huge part of the percentage in making the play.
Strength = Higher the strength, higher the chance of stopping HB in their tracks or slowing down of extra yardage via dive for yards or powerthrough.
SA's = Should be modifiers of the above attributes
Speed = 70+ should give enough players velocity to slow them down
Velocity would have to be added in with weight and strength. Otherwise he would just bounce off the HB.
Strength = better chance of getting a sure wrap up tackle (when on wrap up) or just simply holding onto the HB and slowing him down (being dragged) if his tackling isn't high enough.
Example: CB1: 80 speed, 48 tackling, 20 strength. CB2: 80 Speed 25 tackling, 48 strength. CB3: 90 speed 25 tackling 25 strength.
Power HB: Runs and meets CB1 - He either: A) Wraps up on the HB but does not have enough strength to keep run through a stiff arm. Or gets trucked by power through. Or gets low enough to wrap up around the ankles and the HB fails to get his feet free and falls forward for additional yards.
Meets CB2: Catches the HB from behind, but cannot wrap up and hangs off of the back of the HB as the HB carries him for some more yards. Or he gets stiff armed but is able to semi power through it and hold onto the HB's arm/shoulder and take him down after a few yards/push out of bounds. Puts a big enough hit on the HB's legs to up end him and the HB tumbles for a yard.
Meets CB3: Runs at the hb blindly in a sprint. The HB stiff arms him and puts him to the ground. - The HB lowers his shoulder and slows down for a second or two to regain his balance after deflecting the speedy little gnat. - Dives at the HB's feet and is able to trip him up by grabbing onto a shoe. The HB stumbles for a few extra yards.
Of course this is very cut and dry, there should be a lot more factors and outcomes. But these are some things you see in pro football.
So in summation: Strength: Helps you hold onto the guy, and helps keep from moving forward. Tackling: Helps with technique, being able to wrap up and knowing how to bring the guy down.
One won't work very well without the other, but combined they work fairly consistently.
Originally posted by Bort
Let's say I have a power back with:
100 STR
70 Carrying
50/60ish Spd/Agi
8-10 in Power Through and Lower Shoulder type skills
15 in +brk tackle VA's
perhaps some AEQ with +brk tackle type stuff too
I've seen plenty of power backs with builds similarish to this, no?
The question I pose to the community (and this is often a topic of much debate) is: what sort of tackling/strength/SA's do you think you should need to consistently stop this guy?
I've seen answers ranging from "soft cap str/tck should be enough" to "You should need 100 tackling skill and at least 70-80 strength."
I will keep my opinion to myself for the moment to keep from tainting anyone else's opinion.
Tackling = should be at 50 regardless of the back your stopping. That is a huge part of the percentage in making the play.
Strength = Higher the strength, higher the chance of stopping HB in their tracks or slowing down of extra yardage via dive for yards or powerthrough.
SA's = Should be modifiers of the above attributes
Speed = 70+ should give enough players velocity to slow them down
Velocity would have to be added in with weight and strength. Otherwise he would just bounce off the HB.
Strength = better chance of getting a sure wrap up tackle (when on wrap up) or just simply holding onto the HB and slowing him down (being dragged) if his tackling isn't high enough.
Example: CB1: 80 speed, 48 tackling, 20 strength. CB2: 80 Speed 25 tackling, 48 strength. CB3: 90 speed 25 tackling 25 strength.
Power HB: Runs and meets CB1 - He either: A) Wraps up on the HB but does not have enough strength to keep run through a stiff arm. Or gets trucked by power through. Or gets low enough to wrap up around the ankles and the HB fails to get his feet free and falls forward for additional yards.
Meets CB2: Catches the HB from behind, but cannot wrap up and hangs off of the back of the HB as the HB carries him for some more yards. Or he gets stiff armed but is able to semi power through it and hold onto the HB's arm/shoulder and take him down after a few yards/push out of bounds. Puts a big enough hit on the HB's legs to up end him and the HB tumbles for a yard.
Meets CB3: Runs at the hb blindly in a sprint. The HB stiff arms him and puts him to the ground. - The HB lowers his shoulder and slows down for a second or two to regain his balance after deflecting the speedy little gnat. - Dives at the HB's feet and is able to trip him up by grabbing onto a shoe. The HB stumbles for a few extra yards.
Of course this is very cut and dry, there should be a lot more factors and outcomes. But these are some things you see in pro football.
So in summation: Strength: Helps you hold onto the guy, and helps keep from moving forward. Tackling: Helps with technique, being able to wrap up and knowing how to bring the guy down.
One won't work very well without the other, but combined they work fairly consistently.






























