User Pass
Home Sign Up Contact Log In
Page:
 
Bort
Admin
offline
Link
 
Originally posted by lawdog
Originally posted by pantherz77

I'd suggest WR1-5 (if used correctly), but by the season's start, both should be fine.


Do you mind explaining how it is used correctly? Nobody seems to really know.


It works like any other position. Think of it like the difference between DT and NT. They are the same position basically, but they are separated so you can specify who plays in those positions.

I added the WR1/2/3 positions so you could always specify who would be WR1,2,3 and not have the order get all messed up because somebody got tired. Same deal with CB's.
 
ScudRunner
offline
Link
 
Originally posted by lawdog
Originally posted by pantherz77

I'd suggest WR1-5 (if used correctly), but by the season's start, both should be fine.


Do you mind explaining how it is used correctly? Nobody seems to really know.


Between the post I just put quoting Bort about where each WR lines up, and the post about how the DC can be tweaked properly, that's what you need to know about how to set them up.

If you have a guy who is a better slot receiver than the rest, make him the starter at WR#3. If you want him to be the slot guy all the time, don't put him on the DC anywhere else, and don't put anyone on the DC underneath him at WR#3. That's just an example.
 
Bort
Admin
offline
Link
 
Originally posted by ScudRunner
If you want to have a guy on the DC at multiple WR positions, you can't add him if he's a starter at any of them. So, when I built my WR1-5 spots, I put a lineman as a starter at each of the WR spots, then built them way I wanted underneath him. Once I had it all tweaked, I just removed the lineman from the DC at each WR spot. That way, you can have a guy starting at WR#2 and also be the backup at WR#1, etc.


I'm thinking of maybe removing the restrictions on starters for WR3 4 and 5 for the DC screen - would that be helpful?
 
ScudRunner
offline
Link
 
Originally posted by Bort
Originally posted by ScudRunner

If you want to have a guy on the DC at multiple WR positions, you can't add him if he's a starter at any of them. So, when I built my WR1-5 spots, I put a lineman as a starter at each of the WR spots, then built them way I wanted underneath him. Once I had it all tweaked, I just removed the lineman from the DC at each WR spot. That way, you can have a guy starting at WR#2 and also be the backup at WR#1, etc.


I'm thinking of maybe removing the restrictions on starters for WR3 4 and 5 for the DC screen - would that be helpful?


It would be helpful at all 5 WR/4 CB postions, to be honest. Under the current setup, if you want your #2 WR/CB to fill in for #1 when he's off the field, you have to trick the DC into letting you do that. I think as long as it's set so that a guy can't be put on the DC to start at multiple positions, it will be fine.

 
lrunkle911
offline
Link
 
Originally posted by Bort
Originally posted by ScudRunner

If you want to have a guy on the DC at multiple WR positions, you can't add him if he's a starter at any of them. So, when I built my WR1-5 spots, I put a lineman as a starter at each of the WR spots, then built them way I wanted underneath him. Once I had it all tweaked, I just removed the lineman from the DC at each WR spot. That way, you can have a guy starting at WR#2 and also be the backup at WR#1, etc.


I'm thinking of maybe removing the restrictions on starters for WR3 4 and 5 for the DC screen - would that be helpful?


That would make me very happy!! (same with CB) you would be my hero, even above Boba Fett. well, ok maybe not that high up. but you'd climb quite a few pegs

 
toni8888
offline
Link
 
http://goallineblitz.com/game/game.pl?game_id=80749

D league team and my player:
http://goallineblitz.com/game/player.pl?player_id=777914

he was set on CB position by CPU and was not on any play last game. Team has only 3 CB except him. Is that a bug or?
 
Jim Force
offline
Link
 
Originally posted by Bort

I'm thinking of maybe removing the restrictions on starters for WR3 4 and 5 for the DC screen - would that be helpful?


Yes and can you comment on what happens if both the WR depth chart slot is filled AND the WR1, 2, 3, etc slots are filled. Which does the AI read?
 
lawdog
offline
Link
 
Originally posted by Bort
Originally posted by lawdog

Originally posted by pantherz77


I'd suggest WR1-5 (if used correctly), but by the season's start, both should be fine.


Do you mind explaining how it is used correctly? Nobody seems to really know.


It works like any other position. Think of it like the difference between DT and NT. They are the same position basically, but they are separated so you can specify who plays in those positions.

I added the WR1/2/3 positions so you could always specify who would be WR1,2,3 and not have the order get all messed up because somebody got tired. Same deal with CB's.


This is how I thought it should work as well, but it didn't. In today's game, this was my depth chart:

WR: WR1, WR2, WR3, WR4, WR5
WR1: blank
WR2: blank
WR3: WR2
WR4: blank
WR5: blank

WR2 never played in the WR3 position. Also, here is the play break down:

WR1: 73
WR2: 73
WR3: 25
WR4: 1
WR5: 1

WR energy settings: 55/75 (I left the individual WR positions blank)

Something ain't right...
 
ScudRunner
offline
Link
 
Originally posted by lawdog


This is how I thought it should work as well, but it didn't. In today's game, this was my depth chart:

WR: WR1, WR2, WR3, WR4, WR5
WR1: blank
WR2: blank
WR3: WR2
WR4: blank
WR5: blank

WR2 never played in the WR3 position. Also, here is the play break down:

WR1: 73
WR2: 73
WR3: 25
WR4: 1
WR5: 1

WR energy settings: 55/75 (I left the individual WR positions blank)

Something ain't right...


It looks like, in your case, that the old school WR depth chart trumps the WR1-5 slots. So, WR2 never played in the WR#3 position because he was too busy being WR#2. That would also explain the plays per game.

 
GreyFoxTBC
offline
Link
 
I just watched our scrimmage and the WR/CB depth charts ARE NOT working correctly.
Our game ran at 5pm EST and here are some numbers. In 2 full seasons we have NEVER
had a CB line-up in a WR slot. Today's game it happened 4 times in the 1st half!
We use a very high 75/85 stamina setting as we have great depth and like to spread
the plays out. Here's a play 3 minutes into the 3rd quarter. Note on this 5 WR set
who the WR's are.....
http://goallineblitz.com/game/replay.pl ... _id=313491

Note our WR's are set to normal rotation, NOT to assigned slots. Yet the rotation
showed up with the following plays per...35/40/35/18/11. Way off balance from last
year, and some how the guys were tired enough that the CB's got into the line-up
<scratches head>

Ok I'm doing a more specific breakdown....the 9th play of the game we have a CB
playing WR, WTF!!
http://goallineblitz.com/game/replay.pl ... _id=309996

The CB's which WERE assigned to slots were even worse.
They were in assigned slots and their play numbers were CB1: 69, CB2: 70, CB3: 18, CB4: 17, CB5: 11
CB1 + 2 played EVERY defensive play at their assigned slots. Wonder what their
energy would have been at the end of the game? Note CB2 had 1 extra play than
CB1...as a WR.
CB3 had 18 plays, 4 of which were as WR, therefore he had 14 defensive plays.
CB4 had 17 plays, 5 of which were WR and 10 on Special teams, therefore a total of 2
plays in pass coverage.
CB5: had 11 plays, 8 were on special teams, therefore he played 3 plays in pass coverage.

Energy had to be a factor or the WR's wouldn't have been rotating in and out. Yet
the CB's NEVER rotated, so it obviously doesn't count energy if using the WR, CB
assigned positions. So how bad were those 2 CB's playing at the end of the game?
And why did we have CB's rotating into WR slots for the first time EVER? None of
out basic settings were changed from last year.
 
GreyFoxTBC
offline
Link
 
Don't know why the links to game came across weird, but I'll try again.

1st play showign 3 CB's in at WR slots, 3 minutes into the 3rd quarter.
http://goallineblitz.com/game/replay.pl?game_id=79519&pbp_id=313491

2nd play shows a CB in at WR on the very 1st drive of the game (for either team)
and the 9th play counting the kick-off.
http://goallineblitz.com/game/replay.pl?game_id=79519&pbp_id=309996
 
Bambam3376
offline
Link
 
Has the Old way been fixed where you only put the guys in order the way it was last season
 
Bort
Admin
offline
Link
 
Originally posted by Jim Force
Originally posted by Bort


I'm thinking of maybe removing the restrictions on starters for WR3 4 and 5 for the DC screen - would that be helpful?


Yes and can you comment on what happens if both the WR depth chart slot is filled AND the WR1, 2, 3, etc slots are filled. Which does the AI read?


It will read the WR1/2/3 slots. It only uses the WR slot to "fill" the WR1/2/3 slots when they are empty.
 
Bort
Admin
offline
Link
 
Originally posted by Bambam3376
Has the Old way been fixed where you only put the guys in order the way it was last season


Should be.
 
bcruise
offline
Link
 
Originally posted by Bort
Originally posted by Jim Force

Originally posted by Bort



I'm thinking of maybe removing the restrictions on starters for WR3 4 and 5 for the DC screen - would that be helpful?


Yes and can you comment on what happens if both the WR depth chart slot is filled AND the WR1, 2, 3, etc slots are filled. Which does the AI read?


It will read the WR1/2/3 slots. It only uses the WR slot to "fill" the WR1/2/3 slots when they are empty.

Okay, that explains why my D-League team with no WR1 (but WITH a WR2 and 3) went to the generic WR slot (which happened to be a CPU). I mentioned this in another thread a couple posts down: http://goallineblitz.com/game/forum_thread.pl?thread_id=717476

Still not crazy about the # of plays the CPU got because of that, but at least I know how it works now.

 
Page:
 


You are not logged in. Please log in if you want to post a reply.