CFL and NFL
The NFL's current passer rating (also known as quarterback rating) system was conceived by Pro Football Hall of Fame's retired vice president Don Smith in 1973. The system is a sliding scale design, where outstanding performances meet diminishing returns faster than sub-par ones. The best passer rating that a quarterback can obtain is 158.3, while the worst is zero. The architects of the passer rating had 66.6 in mind as the "average" score, but as styles of play have changed, so have average passer ratings. The cumulative league-wide average passer rating for the years 2000 through 2003, all inclusive, was 78.9 (the figure is typically rounded to the nearest 1/10 of a point); however in 2004 the league average was 82.8. In 2007, the average was 83.5. Passer rating has been applied to all seasons.
[edit] Calculation
Passer rating is determined by four statistical components, each of which is computed as a number between zero and 2.375. The benchmarks for these statistics are based on historical averages. If any of the raw components are beyond the limits of zero or 2.375, the component is set to limiting value of zero or 2.375 as the case may be.
* The component for completion percentage, C, is calculated as: {{COMP \over ATT} \times 100 - 30 \over 20}
* The component for yards per attempt, Y, is calculated as: \left( { YDS \over ATT } - 3 \right) \times { 1 \over 4 }
* The component for touchdowns per attempt, T, is calculated as: { TD \over ATT }\times 20
* The component for interceptions per attempt, I, is calculated as: 2.375 - \left( { INT \over ATT } \times 25 \right)
The four components are then added, divided by 6, and multiplied by 100. Thus, the formula for passer rating can be given as:
{\max(\min(C,2.375),0) + \max(\min(Y,2.375),0) + \max(\min(T,2.375),0) + \max(\min(I,2.375),0) \over 6}\times 100.
The Canadian Football League uses the same formula as the NFL. [1]
[edit] NCAA
Passer rating, known formally in college football as passing efficiency or pass efficiency, is based on player performances. The NCAA passing efficiency formula is:
* The component for completion percentage, C, is calculated as: {COMP \over ATT}\times 100
* The component for yards per attempt, Y, is calculated as: {YDS \over ATT}\times 8.4
* The component for touchdowns per attempt, T, is calculated as: {TD \over ATT }\times 330
* The component for interceptions per attempt, I, is calculated as: { INT \over ATT }\times -200
The four components are then added. Thus, the formula for passer rating can be given as: (C + Y + T + I)
The NCAA passer rating has an upper limit of 1,261.6 and a lower limit of -731.6 (Due to 100% Completion). The upper limit value results if every pass thrown is a 99-yard touchdown and the lower limit if every pass is thrown for a 99-yard loss. A passer who throws only interceptions will have a -200 rating. [2]