User Pass
Home Sign Up Contact Log In
Forum > Suggestions > Llyr's Defensive AI suggestions
Page:
 
Llyranwyar
offline
Link
 
Cliff Notes version:

1) Individual percent chance to blitz per player on DEF. AI screen is redundant, just create separate plays for each blitz and modify the % chance to call the play. Scrap it and use the space for the below slections.

2) Individual players get assigned an action for the play. ZONE, MAN, RUSH. The action should be further specified in the following catagories.

ZONE--flat--normal--deep--coverage(1-4)--Spy

Man--WR(1-5)--TE(1-3)--HB--FB

Rush--Inside--outside(around appropriate end)--Direct route--For DT's --slant left (credit Ken1)--slant right ( " )

# of players in coverage determines the shell. 1-4 determines their starting position when placing them in the field. would allow swapping safety sides, putting a CB in in the middle of the field in Cover3 flanked by safeties, etc.

3)Players assigned man coverage need a default/secondary target chosen by the DC. Combine with one and two or done separately. I think its more important/needed sooner than above, but works best combined. When a player's target blocks, the player makes a vision test for reaction and attempts to default to his secondary action: ZONE selection, secondary man target, or selected rush defined by the DC at the play's creation.

4)Safeties could use a shift not unlike LB's. strong( middle/strong), weak(weak/middle), wide (spread toward sidelines more).

5)Safety coverage priorities: players in the coverage zones need a coverage focus as LB's have a run/pass focus. Defend deepest in zone, defend widest in zone, defend the middle of the zone.

6)option added to allow the LB's to be spread wide in addition to weak, center, strong.

As Ken1 stated, its a lot of work, but together, as a package, I believe that it would be very functional and flexible to help keep pace with further offensive improvements. I also think it would help solve quirky problems being experienced by DC's now.

If anything need to be done first, I would suggest starting with the safeties. Man coverage options applied there would alleviate problems with unintended coverages and legitimate Double Team coverages instead of coaxing the system. Also, would allow a defender on the strong side to focus on the HB so MLB and ROLB can be blitzed together.

Example of usefulness: Shotgun 3wr

DC could choose to put the SS on the hb or te and LOLB on the other. One's target stays in to block. That player then shifts to his alternate action: man cover for double teaming, zone, or blitz. Cover 0-1 would not automatically result in a double team of the TE. Safeties could be set double outside WR's. LB's and Safeties would pause then rush instead of tearing off to go cover a WR who is blocking way away from the play.


Last edited Oct 27, 2008 06:08:45
 
Jed
offline
Link
 
That sounds.....very complex. If something like this was to be put in place, I'd like to see the current Advanced AI kept as well. Basically, give people levels of complexity (basic, advanced, and as I'm calling this, "holy shit").
 
Llyranwyar
offline
Link
 
A basic play would go like this:

Set all DT's and DE's to rush. ALT action: (none/rushing) or (none/zone)

Set each LB to (rush), (man HB), (Man FB), or (man TE.) Alt action: (Man TE), (rush), (man HB)

CB's get set to(man wr1), (man wr2) Alt action: (rush) (rush)

Safeties get set to (man wr1) and (Man WR2) Alt action: (rush) (rush)

Sim sees no one is in a coverage zone and line lines everyone up in cover 0.

Congratulations, you just made a double wide receiver play. I think it sounds more complicated than it is. The actions only get as complex and varied as the different zones and rushes are. Man is just man coverage with a target. Alt action is there for when the man coverage target doesn't exist or turns into a blocker.

In this play, if a rush was initiated from the I form, 2 of the line backers would hold their positions and look for a ball carrier since there was no one to cover. One would Rush. The safeties and Corners would attempt to rush, but the WR's would block what they could and the others would run after the ball carrier.



 
Riggs_Inator
offline
Link
 
Originally posted by Llyranwyar

1) Individual percent chance to blitz per player on DEF. AI screen is redundant, just create separate plays for each blitz and modify the % chance to call the play. Scrap it and use the space for the below slections.


Can already do this. Just set the guys you want to blitz at 100% and shift LB's how you want. Then set that play's % chance to be called.

Other than that I agree with everything.
 
Riggs_Inator
offline
Link
 
Originally posted by Jed
That sounds.....very complex. If something like this was to be put in place, I'd like to see the current Advanced AI kept as well. Basically, give people levels of complexity (basic, advanced, and as I'm calling this, "holy shit").


I'd like it to be called "mastermind." I've been itching for a way to do things like this and create schemes, I see things that happen and I say "Oh, if I could only do this, it would be an awesome play." or "I don't want this guy there because if this happens, if I could only bring that guy here then it would be so much better."
 
Anarcho
offline
Link
 
This is all I want for Christmas.
 
Maddencoach
offline
Link
 
+1
 
odt
offline
Link
 
also add an option to spread out the LBs to cover the flats
 
odt
offline
Link
 
http://goallineblitz.com/game/forum_thread.pl?thread_id=1496371
 
Llyranwyar
offline
Link
 
5 coverage positions might be more appropriate for coverage. If you think of position 1 and 5 as being the closest to the sidelines and 3 being the center then I think you could pretty much arrange a safety shift by placing them in the proper position. That would be just one way of implementing a safety shift and could be done with out making the DC mess with another box.

Using this method, the number of players that have coverage selected for their primary function would determine the shell or starting positions. Then they would drop back to the spot you selected for their coverage position (1-5).

If you wanted a nothing fancy cover 2 set up then you would put the FS and SS in coverage zones 2 and 4. FS would have [ coverage 2] selected. SS would have [coverage 4] selected.

side zone areas side
|-------1--------2--------3-------4-------5-------|
|---------------FS----------------SS--------------|

If you wanted them to shade to one side or the other you could use zones 1 and 3 to put one over the outside and the other over the center.

|-------1--------2--------3-------4-------5-------|
|-------FS---------------SS-----------------------|

To shade them to the other side you could select zones 3 and 5.

|-------1--------2--------3-------4-------5-------|
|------------------------FS--------------SS-------|

To spread them wide, put them in zones 1 and 5.

|-------1--------2--------3-------4-------5-------|
|------FS--------------------------------SS-------|

For cover 3 plays you could say put FS at coverage 1, CB3 could have Coverage 5 selected, and the SS would have coverage 3 selected.

|-------1--------2--------3-------4-------5-------|
|-------FS--------------SS------------CB3------|

Cover 4:

|-------1--------2--------3-------4-------5-------|
|------CB4-------FS--------SS------CB3------|


One possible way of doing the safety shift in the system I propose. Using 7 possible positions would give the DC even more control of how where the safeties line up and where.
Center 4
|------1-----2-----3-----4-----5-----6-----7------|

Just an additional thought on how to implement determining safety play and giving the DC the power to shift the safeties for better coverage.
Last edited Nov 23, 2008 22:13:03
 
Llyranwyar
offline
Link
 
Originally posted by odt
also add an option to spread out the LBs to cover the flats


You would just select [ flat zone ] for the primary action of the LB on the side you want the zone on. STRONG out side and inside LB's will perform a flat zone on the strong side and vice versa for the weak side.
Last edited Nov 23, 2008 22:17:11
 
Llyranwyar
offline
Link
 
The assignment for a given position would have 2 boxes under it instead of the single box for blitz percentage and "0-100" next to it.

A line backer would look like this for a blitz:

________ROLB_________
[rush-direct] [--------]

This is for covering the TE with the option to blitz if the TE stays to block:

_______LOLB___________
[Man-TE1 ] [rush-outside]

Want your DE to cover the HB in a pass, but clog the line if he runs?
_______LDE____________
[Man-HB1 ] [rush-stunt inside]

Brought that safety up to the line in cover1 to help the run defense but you want him to cover the TE on a pass?
_______SS_____________
[Man-TE1 ] [Rush-direct]

Want that MLB to hold his ground and watch for a delay?
_______MLB____________
[zone-spy ] [------------]

 
supgreg
offline
Link
 
bump with my thread attached

http://goallineblitz.com/game/forum_thread.pl?thread_id=1500296
 
Link
 
bump for how epic this should be
 
turnit643
offline
Link
 
epic-ize it.

Current coverage assignment controls are seriously lacking.
 
Page:
 


You are not logged in. Please log in if you want to post a reply.