User Pass
Home Sign Up Contact Log In
Rage Kinard
offline
Link
 
I had set up defense for a LOLB blitz so it would go from the outside in. Instead, the CPU moved MLB over TE and LOLB to center of field.

http://goallineblitz.com/game/replay.pl?game_id=79215&pbp_id=385261
 
Rage Kinard
offline
Link
 
This happens on several plays. The LOLB moves to the MLB position and the MLB moves head up over the TE.

 
Mike Rogers
Lead Tester
offline
Link
 
Its a Cover 1 Man Under, that will happen.

Try using a different Formation to run that blitz from.

Also look at shifting your LB when in Nickel and Dime if you really want it to behave as you describe.
as pretty much anytime you take out a LB the two remain will play more centrally unles in coverage.
 
Rage Kinard
offline
Link
 
Look at this play.

The ROLB lines up at LOLB.
The LOLB lines up at MLB.
The MLB lines up at ROLB

http://goallineblitz.com/game/replay.pl?game_id=79215&pbp_id=385092
 
Link
 
Originally posted by Rage Kinard
Look at this play.

The ROLB lines up at LOLB.
The LOLB lines up at MLB.
The MLB lines up at ROLB

http://goallineblitz.com/game/replay.pl?game_id=79215&pbp_id=385092


looks like a strong side shift to me.
 
Rage Kinard
offline
Link
 
I didn't have a setup for a strong side shift for pro set on second down. Besides shouldn't a strong side shift mean that all 3 LB's shift left (or towards the strong side) rather than the ROLB moving to the left of the LOLB?
 
Mike Rogers
Lead Tester
offline
Link
 
You do seem to have a lot of Man cover Underneath, so that will throw off the balance a bit. As the man assigned to the TE will cheat towards him.

Also, just because you havent entered a shift doesnt mean that you didnt put in a relevant play and the AI is filling in for you.
Did you have specific outputs that covered that exact situation?

What did you have dialled in, does it look anything like that?

Do you have your LBs all backing up each other?

Sometimes if ALL the LBs are below the Sub IN energy level, they will just auto fill from the DC for that position so they can end up out of position.

Other than that, I cant help as I havent seen this as an issue in any of my sims today.
 
Rage Kinard
offline
Link
 
I did not have anything dialed in for that specific formation.

I do not have my starting LBs backing each other up.

If you look at the chart it has the players listed in the proper position.

LOLB Jonathan Grindleweight
MLB Aillyn Twill
ROLB Carson Cain

The ROLB has never been responsible for the TE. He is usually responsible for the HB. However in this play, the player listed at ROLB is lined up over the TE. The person listed as LOLB is lined up over the RG and the player listed at MLB is lined up over the LG. I don't mind that the LBs are shifted over. If the ROLB was over the LG, the MLB was over the RG and the LOLB was outside the TE, then no problem. My problem is that it is going to be impossible to put together blitz packages if I don't know where my players are going to line up.
 
Mike Rogers
Lead Tester
offline
Link
 
Agreed it looks odd, normally as you say its most commonly ROLB=HB MLB=TE LOLB=FB.

I was hoping you'd say it was on only one specific play call so I could avoid it

If you want to, PM me what you think was being called, if you know for sure and I will check through all my teams games to find the same situation?

Thats about as much as I can do.
 
Mike1709
offline
Link
 
Originally posted by Rage Kinard
I did not have anything dialed in for that specific formation.

I do not have my starting LBs backing each other up.

If you look at the chart it has the players listed in the proper position.

LOLB Jonathan Grindleweight
MLB Aillyn Twill
ROLB Carson Cain

The ROLB has never been responsible for the TE. He is usually responsible for the HB. However in this play, the player listed at ROLB is lined up over the TE. The person listed as LOLB is lined up over the RG and the player listed at MLB is lined up over the LG. I don't mind that the LBs are shifted over. If the ROLB was over the LG, the MLB was over the RG and the LOLB was outside the TE, then no problem. My problem is that it is going to be impossible to put together blitz packages if I don't know where my players are going to line up.


I've had exactly the same situation, I think the LOLB and MLB are in their correct positions, it's just that your ROLB has moved across to cover the TE. The MLB is lined up roughly level with the C and the LOLB is lined up roughly opposite the RG/RT, it's just the ROLB has come right across.

I also had a play where the MLB and the LOLB just swapped over so that the MLB was opposite the TE and the LOLB was opposite the C.

Also, on a cover 1 corner blitz, the LOLB lined up wide on the left opposite the WR, I'd have thought that the spare safety should have got this assignment and the LB certainly shouldn't have been lined up as 'in effect a CB' at the snap as it's really just giving the game away.

Then in nickel, we had the LOLB and MLB on the field, I thought it was the LOLB who comes out in Nickel packages though?

That was our first 4 plays on D from scrimmage as well.
Last edited Jul 31, 2008 08:23:17
 
RMiller517
offline
Link
 
Thread locked by moderator.
 


You are not logged in. Please log in if you want to post a reply.