User Pass
Home Sign Up Contact Log In
Forum > Discuss GLB Issues With Catch22 > NOT A BUG - CLOSED > Follow my AI EXACTLY, even when there is no match (use with caution!) Not following
Page:
 
czman
offline
Link
 
Our team called a few pitch plays. I did not have any run outside or pith plays in the play book. Everything was either middle or off tackle.

Also the cover 3 zone defense in nickel is broken. My team ran it a few times and it made no sense. I have also seen the SS cover the TE and the FS and MLB run deep in a cover two man scheme.

What happens if a person comes up with a play that is not possible to run. Like a blitz 6 cover 6 scheme. Will the sim blow up and give us a day like today? I tried to run a real vanilla defense in this a lot of cover 3 zone and cover 2 man and I had some strange choices for who was defending who.

I also did not punt once in the second quarter and I do not have any input that should have caused that.

In closing the new advanced AI tactics seem to be dinked. I have gone over my game and my AI tactics very carefully and I see a lot of things that do not fit. I clicked the "Follow my AI EXACTLY, even when there is no match (use with caution!)" because I have done about 20 hours of work on my inputs and thought I had almost every situation covered that I would need. I can tell you that there is more wrong with the game than just WRs not being an option to throw too.
Last edited Jul 29, 2008 08:13:25
 
czman
offline
Link
 
I figured our why our team called a pitch play.

However, I still cannot figure out why we did not punt in the second quarter and why we had LBs trying to cover WR while CBs dropped into zone and the SS maned up on the TE.
 
Seric
offline
Link
 
a SS will man up on a TE, that's not unheard of. The rest, I don't know.
 
czman
offline
Link
 
Originally posted by Seric
a SS will man up on a TE, that's not unheard of. The rest, I don't know.


In a cover two man you should no have the CB and FS drop back into man while the LB covers the WR and the SS covers the TE. It should be FS/SS in zone and everyone else covers the person directly in front of them.
 
Amyrlin
offline
Link
 
Originally posted by czman
Originally posted by Seric

a SS will man up on a TE, that's not unheard of. The rest, I don't know.


In a cover two man you should no have the CB and FS drop back into man while the LB covers the WR and the SS covers the TE. It should be FS/SS in zone and everyone else covers the person directly in front of them.


Not all the time, but yeah, that's the basic idea.

Of course NFL teams will call all sorts of tricky zone/man combinations to confuse the hell out of the offense - but since we don't have that much control, I think it makes more sense for the basic plays to default to their simplest forms - cover 2 man being the safeties in deep zones and the CBs and LBs in man coverage, as you pointed out.
 
Bort
Admin
offline
Link
 
Example play of cover 2 that's not SS/FS in zone? Cover 2 should always run like that unless you blitz a safety or something. Are you sure you're not looking at a cover 3, cover 1, or cover 0?
 
czman
offline
Link
 
All of my cover 3 should have been zone and that was really bad too. My team left the entire middle of the field uncovered. It was like the team coveres the deep ball and the sidelines only. I am not sure if that is players vision or the sim.

I also noticed the safeties just running to a specific depth no matter what the WRs ran. There times my safeties were 15 to 20 yards over the top down field and there were times they were at a reasonable distance.

I am not sure if that has to do with my Coverage Distance settings.

I did very little blitzing and should be able to to tell if a LB is blitzing on the replay.

Do you think we could get a comprehensive guide to the AU tactics before the next scrimmage game. At least explaining how Coverage Distance works with man and zone play calling.
 
czman
offline
Link
 
I found a miss click I made. I had one cover 3 man out there. Although it was in a very specific situation and I do I still think the cover 3 zone in the nickel is more of a prevent where no one covers the middle of the field.
 
czman
offline
Link
 
I also still have no clue why we did not punt in the 2nd quarter. I had no inputs in the second quartet for going for it on 4th down.
 
Bort
Admin
offline
Link
 
Originally posted by czman
All of my cover 3 should have been zone and that was really bad too. My team left the entire middle of the field uncovered. It was like the team coveres the deep ball and the sidelines only. I am not sure if that is players vision or the sim.

I also noticed the safeties just running to a specific depth no matter what the WRs ran. There times my safeties were 15 to 20 yards over the top down field and there were times they were at a reasonable distance.

I am not sure if that has to do with my Coverage Distance settings.

I did very little blitzing and should be able to to tell if a LB is blitzing on the replay.

Do you think we could get a comprehensive guide to the AU tactics before the next scrimmage game. At least explaining how Coverage Distance works with man and zone play calling.


Coverage distance determines how far back the over the top zones will fall back. Short is hardly at all, and long is like 7-10 yds. No matter what you set it to though, they will always play over the top and try to keep up with the deep guys in their zones.

Can you give an example of a nickel zone underneath play where the guys don't cover the middle of the field, so I can take a look? All the plays are pretty vanilla and should have the zones pretty well split up in a basic way.
 
czman
offline
Link
 
Originally posted by Bort
Originally posted by czman

All of my cover 3 should have been zone and that was really bad too. My team left the entire middle of the field uncovered. It was like the team coveres the deep ball and the sidelines only. I am not sure if that is players vision or the sim.

I also noticed the safeties just running to a specific depth no matter what the WRs ran. There times my safeties were 15 to 20 yards over the top down field and there were times they were at a reasonable distance.

I am not sure if that has to do with my Coverage Distance settings.

I did very little blitzing and should be able to to tell if a LB is blitzing on the replay.

Do you think we could get a comprehensive guide to the AU tactics before the next scrimmage game. At least explaining how Coverage Distance works with man and zone play calling.


Coverage distance determines how far back the over the top zones will fall back. Short is hardly at all, and long is like 7-10 yds. No matter what you set it to though, they will always play over the top and try to keep up with the deep guys in their zones.

Can you give an example of a nickel zone underneath play where the guys don't cover the middle of the field, so I can take a look? All the plays are pretty vanilla and should have the zones pretty well split up in a basic way.


The site is a bit slow, I will post it once I find some. Thanks for the help with coverage distance. I just want to make sure I understand though. It only refers to the distance the over the top man plays from the deepest man on his side.
 
Bort
Admin
offline
Link
 
Originally posted by czman
The site is a bit slow, I will post it once I find some. Thanks for the help with coverage distance. I just want to make sure I understand though. It only refers to the distance the over the top man plays from the deepest man on his side.


No, it refers to how deep the center of the over the top man's zone is, as in how far he will drop back initially. Distance from the man when playing him straight up is determined by the player's advanced tactics settings.
 
czman
offline
Link
 
http://goallineblitz.com/game/replay.pl?game_id=81345&pbp_id=230

On 1st and 10 with them in a 3 WR set with me in the dime with 4 DL it should have been a cover 3 zone.

If I had to force that into this play I would say the rcb the FS and the OLB played over the top and the SS played the flat while the....ok I have no clue how that happened. i would like to reiterate that on 1st and 10 with 3 wrs if we are in a dime it should be a cover 3 zone.

I did have a 3-4 input with a blitz cover 1 but I did not see any blitzers and we had 4 DL.
 
Bort
Admin
offline
Link
 
Thanks for the link - I'll check it out. Looks like the LB in the middle should have played a center zone, but maybe he's set to go to the outside.
 
czman
offline
Link
 
Originally posted by Bort
Thanks for the link - I'll check it out. Looks like the LB in the middle should have played a center zone, but maybe he's set to go to the outside.


I can probably find more of these when i get home from work. Most of the strange zones I saw were in cover 3.

Edit: me and the wife are going out to dinner tonight so I cannot promise that I will have time to really go through with a fine tooth comb.
Last edited Jul 29, 2008 11:51:42
 
Page:
 


You are not logged in. Please log in if you want to post a reply.