User Pass
Home Sign Up Contact Log In
Forum > Discuss GLB Issues With Catch22 > NOT A BUG - CLOSED > SI FB Weakside Slam - NOT A BUG - CLOSED
Page:
 
Bluehaze
offline
Link
 
I am not sure if this is a bug or not, but I have checked my Depth Charts, Packages, and AI, and for some reason the TE and the FB are playing each others positions in this play.

http://goallineblitz.com/game/replay.pl?game_id=1829083&pbp_id=488024

The play calls for a BTE at both TE positions in the package (even though there is only one on the field), and it calls for FB1 (rushing FB).

In my Depth Chart I have only blockers listed under the BTE slot, and FB1 is a rushing FB.

Somehow, my receiving TE got put in at FB and my rushing FB was in at TE (which called for a BTE).



Can anyone show me my error (if indeed it is "on me")? I can not find it, and therefore listed it here as a possible bug.
Edited by Mike Rogers on Nov 7, 2011 14:25:11 (Closed)
 
Captain Kaos
offline
Link
 
From what I've seen, the only conclusion I could come up with is a restriction on STOP archetype players. The player that should have been in (G w/ ST archetype), was nowhere on the field.
 
Dr. E
offline
Link
 
A quick look at the depth chart and my guess is the Dots are out of position because one of them was first picked due to stamina to be in that play and was therefore not available for the other position so the other dot was put in play. Just my opinion, but that depth chart is a mess and you are going to have a lot of issues like this one.
 
drewsky
offline
Link
 
Re-check your play options. I think TE1 was specified instead of BTE as you say. This moved the FB to play at TE. Your FB1 chart was then empty so it selected the TE to play at FB.
 
Bluehaze
offline
Link
 
Originally posted by drewsky
Re-check your play options. I think TE1 was specified instead of BTE as you say. This moved the FB to play at TE. Your FB1 chart was then empty so it selected the TE to play at FB.


BTE was specified for BOTH TE positions (BTE and TE, even though this play only calls for a TE) in all instances of that package package, and that specific play as well.

FB1 does call for my rushing FB (and only my rushing FB) in all instances of that package (double checked those already).

I have two capable blockers listed on my DC at the BTE position (although neither is actually a TE), and either one of them should have been called upon regardless of energy.

My main concern is why would it swap the rushing FB and the receiving TE when they are not called for in those positions in any formation of those packages?

Originally posted by Kaotik
From what I've seen, the only conclusion I could come up with is a restriction on STOP archetype players. The player that should have been in (G w/ ST archetype), was nowhere on the field.


That G (STOP) has played in plenty of plays in the past at BTE, and the only possible cause to him being out was low energy. Now if the dot backing him up is in at another position, shouldn't he be forced to start there if there is no other dots listed as a BTE?

Thanks so far for helping / looking at this.

I am still quite puzzled/concerned with this.
 
drewsky
offline
Link
 
Maybe the issue is with BTE being used for both TE positions. AI can't figure that out, so it kicks out 1 BTE callout and replaces it with TE1.
 
Bluehaze
offline
Link
 
Originally posted by drewsky
Maybe the issue is with BTE being used for both TE positions. AI can't figure that out, so it kicks out 1 BTE callout and replaces it with TE1.


I thought that may be the issue too, but after looking over other formations, I have the same thing called out (BTE for both positions) and the proper personnel were in for the play.

*shrug*

Hopefully this is a "one time" fluke (although I would still like to see some sort of explanation from the "powers that be").

Oh, the other thing I noticed is that this play was set to 0% within my packages, so auto-adjust must have selected it based upon my "adjust very quickly" setting. When auto-adjust kicks in, does it have the "authority" to override your depth chart settings too?
 
Bluehaze
offline
Link
 
OK, now after this mornings game simmed I am still getting this error.

http://goallineblitz.com/game/replay.pl?game_id=1829084&pbp_id=963968
http://goallineblitz.com/game/replay.pl?game_id=1829084&pbp_id=967262
http://goallineblitz.com/game/replay.pl?game_id=1829084&pbp_id=967972

And now it is happening on the Weak I Strongside FB Slam as well...
http://goallineblitz.com/game/replay.pl?game_id=1829084&pbp_id=966993
http://goallineblitz.com/game/replay.pl?game_id=1829084&pbp_id=967809

It would appear that it happened twice more in the first game (that I missed) as well...
http://goallineblitz.com/game/replay.pl?game_id=1829083&pbp_id=488965
http://goallineblitz.com/game/replay.pl?game_id=1829083&pbp_id=489222

This has happened now only on plays where I have the BTE specified in the drop down within my package for both TE slots.

Why is the CPU putting my Receiving TE in at FB?

This is obviously not a one time thing, nor do I believe it to be an issue with my AI. I believe it is a glitch with the depth chart and possibly energy settings, but why would it not put another FB in instead of my receiving TE?

Now I also realize that I shouldn't complain too much, as I think all of the plays gained some sort of yardage, but i will cost us at some point with a TFL or even worse, a fumble.

Help please?
 
Mike Rogers
Lead Tester
offline
Link
 
Send me a GM (with OC) and I'll check it out for you.

Dont change the Inputs yet though, until I can verify the issue.
 
Mike Rogers
Lead Tester
offline
Link
 
Just a quick post for reference.

I've verified the play call Input and the Package Output, and that the expected personnel on this play : http://goallineblitz.com/game/replay.pl?game_id=1829083&pbp_id=488024 and all others linked should be as follows;

TE = BTE
FB = FB1
HB = HB1
QB = QB
BTE = BTE

There were two players in the BTE slot, one is filling the RT position, the second is not on the field (STOP G "Octopus")

The player who occupies both FB1/TE1 slots is pulled to auto fill the TE position.
As FB1 is already in a position, the FB position is also auto filled by the player who is listed as TE and TE2.

PM sent to OP.
Edited by Mike Rogers on Oct 29, 2011 18:55:27
 
Bluehaze
offline
Link
 
Do we have any answers on this yet? This problem is going to end up costing us a game somewhere down the line if I do not get it resolved.

It also seems that the CPU is deviating from my game plan before even trying the plays. The auto adjust is choosing plays at 0% before attempting the ones that I have called. I had it on adjust quickly (which is supposed to kick in if it is NOT working), but the CPU is not even using my plays at all it seems. (Minor detail as of now).

Here are some more plays...
http://goallineblitz.com/game/replay.pl?game_id=1840254&pbp_id=2409992
http://goallineblitz.com/game/replay.pl?game_id=1840254&pbp_id=2410031
http://goallineblitz.com/game/replay.pl?game_id=1840254&pbp_id=2410196
http://goallineblitz.com/game/replay.pl?game_id=1840254&pbp_id=2410204
http://goallineblitz.com/game/replay.pl?game_id=1840254&pbp_id=2410278 (In this play I have specific personnel called for, with only one player on the DC at those positions, and the CPU still swapped the TE and FB) This is very wrong, as both players that were in on the play were called for in their proper positions. Why would the CPU swap them?

I am sure there are plenty more instances from this most recent game, but I don't have the time now to go through and find them all.

One quick question that I just thought of...

Would the DC on the "Formations" page of the DC be screwing with my personnel called within the packages? If so, Bort really needs to have an override to allow packages to take precedence over formations. Or to put a tick box (or three) to allow the disabling of DC on the formations page (either defense, offense or both). This is what I am betting is happening, is there is a conflict of which personnel should be in based upon formation, and package and the CPU has decided to go with the formation page on some of these plays (all of the time though). I can not set up my formations page to function properly with the use of packages, as I call out different dots for different plays (to help in the avoidance of scouting).

Thanks again for your help, and please keep me posted.
 
drewsky
offline
Link
 
Originally posted by Mike Rogers


There were two players in the BTE slot, one is filling the RT position, the second is not on the field (STOP G "Octopus")




Why is the STOP G Octopus not called in?
 
Bluehaze
offline
Link
 
I am starting to think that it has something to do with the CPU looking at the "Formations" page in the DC for some plays and not others. The personnel called out in each specific package should over rule anything on the formations page though.
 
Mike Rogers
Lead Tester
offline
Link
 
Originally posted by Bluehaze
I am starting to think that it has something to do with the CPU looking at the "Formations" page in the DC for some plays and not others. The personnel called out in each specific package should over rule anything on the formations page though.


I looked at that, but the players used in the sim don't match up with the Formation over rides though.

Like I said, I'm going to go through all the variables tonight and nail this one down.
 
Bluehaze
offline
Link
 
Resolved.

Thank you 1 million thanks Mike Rogers.

You da man!!
 
Page:
 


You are not logged in. Please log in if you want to post a reply.