Good Morning,
I have found what I believe to be a bug in the AI from our game yesterday...
http://goallineblitz.com/game/game.pl?game_id=232417
Our DC had the following 3 players at TE:
http://goallineblitz.com/game/player.pl?player_id=660644
http://goallineblitz.com/game/player.pl?player_id=668313
http://goallineblitz.com/game/player.pl?player_id=787209
And it had our only real TE at WR3 instead of TE....
http://goallineblitz.com/game/player.pl?player_id=668578
Basically, we wanted a 6 man line, and to play our actual TE as WR3. One of the reasons we wanted to do this was to try out a WR Screen that had eaten our lunch the game before, but the WR3 blocks on that play, and none of our true WR's are good blockers. Our TE is decent.
In our playbook we removed all Short WR passes except the "WR Screen (Single Back)".
Then we set our offensive AI to do the following on 60% of first downs: Pass, Single Back formation, Short play distance, WR as primary receiver, and RB1 and TE1 from depth chart.
What happened was that the play did get run 60% of the time, but it moved our WR4 into the WR3 slot, and moved our WR3 into the TE spot..... He is not on the DC as TE at all....
Here's an example:
http://goallineblitz.com/game/replay.pl?game_id=232417&pbp_id=8715288
In watching the game, I noticed that a couple of times on 2nd down (for which we had no specific AI in place) it ran the WR Screen and kept the WR3 in their spot and the TE in their spot as it should have.
Here is an example:
http://goallineblitz.com/game/replay.pl?game_id=232417&pbp_id=8718005
Can you tell me why this happened, and if it can be fixed???
I have found what I believe to be a bug in the AI from our game yesterday...
http://goallineblitz.com/game/game.pl?game_id=232417
Our DC had the following 3 players at TE:
http://goallineblitz.com/game/player.pl?player_id=660644
http://goallineblitz.com/game/player.pl?player_id=668313
http://goallineblitz.com/game/player.pl?player_id=787209
And it had our only real TE at WR3 instead of TE....
http://goallineblitz.com/game/player.pl?player_id=668578
Basically, we wanted a 6 man line, and to play our actual TE as WR3. One of the reasons we wanted to do this was to try out a WR Screen that had eaten our lunch the game before, but the WR3 blocks on that play, and none of our true WR's are good blockers. Our TE is decent.
In our playbook we removed all Short WR passes except the "WR Screen (Single Back)".
Then we set our offensive AI to do the following on 60% of first downs: Pass, Single Back formation, Short play distance, WR as primary receiver, and RB1 and TE1 from depth chart.
What happened was that the play did get run 60% of the time, but it moved our WR4 into the WR3 slot, and moved our WR3 into the TE spot..... He is not on the DC as TE at all....
Here's an example:
http://goallineblitz.com/game/replay.pl?game_id=232417&pbp_id=8715288
In watching the game, I noticed that a couple of times on 2nd down (for which we had no specific AI in place) it ran the WR Screen and kept the WR3 in their spot and the TE in their spot as it should have.
Here is an example:
http://goallineblitz.com/game/replay.pl?game_id=232417&pbp_id=8718005
Can you tell me why this happened, and if it can be fixed???






























