is toss and pitch the samething?
oten638
offline
offline
Originally posted by Maddencoach
Originally posted by oilspill29
is there a way to set the number of receivers you have in on a certain play? i can't find it anywhere in the options in advanced offensive tactics...
No you cant select who you want or how many players in a certain position you want out there. The best way is get 5 WR on a play is selecting Shotgun and long as the play distance but there's no way you will always get 5 WR[/QUOTE
you can select shotgun-5WR
Originally posted by oilspill29
is there a way to set the number of receivers you have in on a certain play? i can't find it anywhere in the options in advanced offensive tactics...
No you cant select who you want or how many players in a certain position you want out there. The best way is get 5 WR on a play is selecting Shotgun and long as the play distance but there's no way you will always get 5 WR[/QUOTE
you can select shotgun-5WR
oten638
offline
offline
If i was on the 10 yard line and had these two inputs, they would both be false. right?
10 is not between 25 and 10
10 is not between 10 and 0
1st input: runs when the ball is between the opp25 and the opp10
2nd input: runs when the ball is between the opp10 and oppGoal
unless it means 'to and including'
10 is not between 25 and 10
10 is not between 10 and 0
1st input: runs when the ball is between the opp25 and the opp10
2nd input: runs when the ball is between the opp10 and oppGoal
unless it means 'to and including'
LulzDot
offline
offline
It means "including" as well. So if you want to set up everything set it up as 0-1, 1-3, 3-7, 7-10 yds that is what most people have things set up as.
oten638
offline
offline
what is the big I formation. You can pick it in the ai tactics but there is no (big I) in the playbook.
Baustin
offline
offline
Originally posted by oten638
what is the big I formation. You can pick it in the ai tactics but there is no (big I) in the playbook.
Two TE set. It's out now because there was only one play. Too easy to stop. It might be back if Bort designs more plays for the formation.
what is the big I formation. You can pick it in the ai tactics but there is no (big I) in the playbook.
Two TE set. It's out now because there was only one play. Too easy to stop. It might be back if Bort designs more plays for the formation.
phillkoo
offline
offline
I have a Level 6 QB, with four Level 1(4), all CPU controlled, a Level 4(WR), Level 1 TE CPU Controlled, and a Level 5(FB), would it be adviseable to switch tactics by favoring my Level 4(WR), and Level 5(FB)??? The CPU controlled WR and TE's don't catch very well.
StatlerandWaldorf
offline
offline
What is difference in basic settings and play default for running plays for HB and FB?
basicems24
offline
offline
Originally posted by phillkoo
I have a Level 6 QB, with four Level 1(4), all CPU controlled, a Level 4(WR), Level 1 TE CPU Controlled, and a Level 5(FB), would it be adviseable to switch tactics by favoring my Level 4(WR), and Level 5(FB)??? The CPU controlled WR and TE's don't catch very well.
At those low levels, you can't do much about it. Nobody catches well at those levels.
I have a Level 6 QB, with four Level 1(4), all CPU controlled, a Level 4(WR), Level 1 TE CPU Controlled, and a Level 5(FB), would it be adviseable to switch tactics by favoring my Level 4(WR), and Level 5(FB)??? The CPU controlled WR and TE's don't catch very well.
At those low levels, you can't do much about it. Nobody catches well at those levels.
basicems24
offline
offline
Originally posted by StatlerandWaldorf
What is difference in basic settings and play default for running plays for HB and FB?
Play default is for pass plays where you are using a different position as the primary receiver.
If you are running a pass play that has the HB running a route and a TE as the primary receiver, you can switch him to run the route for that individual play.
Basic settings uses the HB, FB run route or block percentages you assign in the basic pass settings for basic tactics.
What is difference in basic settings and play default for running plays for HB and FB?
Play default is for pass plays where you are using a different position as the primary receiver.
If you are running a pass play that has the HB running a route and a TE as the primary receiver, you can switch him to run the route for that individual play.
Basic settings uses the HB, FB run route or block percentages you assign in the basic pass settings for basic tactics.
Smiling Assasain
offline
offline
Here is a question regarding the depth chart when using the Advanced offense AI.
On the depth chart there are two settings for HB, FB and TE. If I set the top setting with 2 HB's and set the bottom with a different HB and a FB as #2. Which setting will it use, the first chart(top) or the second(bottom)?
On the depth chart there are two settings for HB, FB and TE. If I set the top setting with 2 HB's and set the bottom with a different HB and a FB as #2. Which setting will it use, the first chart(top) or the second(bottom)?
Last edited Nov 17, 2008 00:11:05
Smiling Assasain
offline
offline
If I have 1 medium WR play and 1 medium TE play in the I formation in my playbook. And in my output I have:
Play type: Pass
Formation: I
Distance: Medium
Primary Receiver: WR
then will the AI pick that particular Medium WR I pass play or will it just pick from all med pass plays in I formation in your book?
Play type: Pass
Formation: I
Distance: Medium
Primary Receiver: WR
then will the AI pick that particular Medium WR I pass play or will it just pick from all med pass plays in I formation in your book?
Kakseca
offline
offline
Originally posted by Smiling Assasain
If I have 1 medium WR play and 1 medium TE play in the I formation in my playbook. And in my output I have:
Play type: Pass
Formation: I
Distance: Medium
Primary Receiver: WR
then will the AI pick that particular Medium WR I pass play or will it just pick from all med pass plays in I formation in your book?
It should look at the Medium Pass play for the WR not the TE. If you put in the TE as the primary receiver it will look at the TE play instead. This is of course you both have those plays in your playbook.
If I have 1 medium WR play and 1 medium TE play in the I formation in my playbook. And in my output I have:
Play type: Pass
Formation: I
Distance: Medium
Primary Receiver: WR
then will the AI pick that particular Medium WR I pass play or will it just pick from all med pass plays in I formation in your book?
It should look at the Medium Pass play for the WR not the TE. If you put in the TE as the primary receiver it will look at the TE play instead. This is of course you both have those plays in your playbook.
Slinger17
offline
offline
Originally posted by Smiling Assasain
Here is a question regarding the depth chart when using the Advanced offense AI.
On the depth chart there are two settings for HB, FB and TE. If I set the top setting with 2 HB's and set the bottom with a different HB and a FB as #2. Which setting will it use, the first chart(top) or the second(bottom)?
HB1, HB2, FB1, FB2, TE1, and TE2 actually have nothing to do with the depth chart itself. To set starters. go up to the HB, FB, and TE spots. The HB1, HB2, FB1, FB2, TE1, and TE2 slots are used to designate which players you want to use on specific plays. You could set your K to HB1 and he wouldn't ever see a snap unless you designate him on plays. For instance, our team has a power back and a speed back, HB1 and HB2 respectively. On goal line plays, I have HB1, the power back, in. On longer plays, I have HB2, the speedy back, in.
When you set an input/output on the advanced AI, look for a slot labeled "HB (maybe RB) Depth Chart" and you can say what RB you want in for that situation
Here is a question regarding the depth chart when using the Advanced offense AI.
On the depth chart there are two settings for HB, FB and TE. If I set the top setting with 2 HB's and set the bottom with a different HB and a FB as #2. Which setting will it use, the first chart(top) or the second(bottom)?
HB1, HB2, FB1, FB2, TE1, and TE2 actually have nothing to do with the depth chart itself. To set starters. go up to the HB, FB, and TE spots. The HB1, HB2, FB1, FB2, TE1, and TE2 slots are used to designate which players you want to use on specific plays. You could set your K to HB1 and he wouldn't ever see a snap unless you designate him on plays. For instance, our team has a power back and a speed back, HB1 and HB2 respectively. On goal line plays, I have HB1, the power back, in. On longer plays, I have HB2, the speedy back, in.
When you set an input/output on the advanced AI, look for a slot labeled "HB (maybe RB) Depth Chart" and you can say what RB you want in for that situation
You are not logged in. Please log in if you want to post a reply.
